Add and update drivers for MediaTek MT76x8 SoCs
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest posting 2/20 of 28 patches 0 repliesNew
- v3 posting 1/20 of 28 patches 0 repliesSuperseded
Patches in v3 posting 2/2 No applies recorded yet
None of the 28 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [U-Boot] [PATCH v3 00/28] Add and update drivers for MediaTek MT76x8 SoCs
Am 25.09.19 um 11:45 schrieb Weijie Gao:
Quoted 96 lines
This patch series have the following changes:
- Add pinctrl(both pinmux and pinconf) driver, reset controller driver and clock driver for mt7628.
- Add mt7628 platform to mtk-sd driver.
- Modify mt7628's ethernet & usb phy driver to take advantages from the new drivers.
- Update mt7621-spi driver with a new transfer method.
- Enable fifo, disable flow control, and enable non-DM implementation for mtk hsuart driver.
- Enanble the new drivers for currently existed mt7628 boards.Changes of v2:
- Change clock gateing driver to a more 'generic' driver which supports output clock rates of CPU/SYS_BUS/peripherals.
- mt7621-spi now uses accuratesys_freqfrom clock driver.
- Make PHY link detection optional via DT.
- Select essential drivers inKconfiginstead of setting in defconfig files.Changes of v3:
- Add const qualifier for structs inpinctrl-mt7628.c.
- Make mt76x8-usb-phy depends onSOC_MT7628.
- Simplify logic of card-detection inmtk-sd.c.Weijie Gao (28):
serial:serial_mtk: enable FIFO and disable flow control
serial:serial_mtk: add non-DM version for SPL
dts: mtmips: move uart property clock-frequency intomt7628an.dtsi
dts: mtmips: enable high-speed UART support for mt7628
clk: add clock driver for MediaTek MT76x8 platform
dts: mtmips: add clock node for mt7628
spi: mt7621-spi: use clock frequency from clk driver
spi: mt7621-spi: remove data cache and rewrite its xfer function
spi: mt7621-spi: restore default register value after each xfer
pinctrl: add support for MediaTek MT7628
dts: mtmips: add pinctrl node for mt7628
dts: mtmips: add default pinctrl for uart nodes
reset: add reset controller driver for MediaTek MIPS platform
dts: mtmips: update reset controller node for mt7628
phy: mt76x8-usb-phy: add slew rate calibration and remove non-mt7628
part
net: mt7628-eth: remove hardcoded gpio settings and regmap-based phy
reset
net: mt7628-eth: make phy link up detection optional via DT
net: mt7628-eth: free rx descriptor on receiving failure
net: mt7628-eth: add support to isolate LAN/WAN ports
dts: mtmips: enable eth port0 led and link poll functions for all
boards
mmc: mtk-sd: add support for MediaTek MT7620/MT7628 SoCs
mmc: mtk-sd: add a dts property cd-active-high for builtin-cd mode
dts: mtmips: add mmc related nodes formt7628an.dtsi
dts: mtmips: add default pinctrl for gardena-smart-gateway-mt7688
dts: mtmips: add default pinctrl to eth nodes for all boards
mips: mtmips: change baudrate table for all boards
mips: mtmips: select essential drivers inKconfig
configs: mtmips: remove configs which are selected inKconfigor
uselessarch/mips/Kconfig | 6 + .../mips/dts/gardena-smart-gateway-mt7688.dts | 19 +- arch/mips/dts/linkit-smart-7688.dts | 16 +- arch/mips/dts/mt7628a.dtsi | 246 +++++++- arch/mips/mach-mtmips/Kconfig | 2 + ...gardena-smart-gateway-mt7688-ram_defconfig | 7 - .../gardena-smart-gateway-mt7688_defconfig | 7 - configs/linkit-smart-7688-ram_defconfig | 7 - configs/linkit-smart-7688_defconfig | 7 - drivers/clk/Makefile | 1 + drivers/clk/mtmips/Makefile | 3 + drivers/clk/mtmips/clk-mt7628.c | 158 +++++ drivers/mmc/Kconfig | 2 +- drivers/mmc/mtk-sd.c | 29 +- drivers/net/Kconfig | 1 + drivers/net/mt7628-eth.c | 135 ++-- drivers/phy/Kconfig | 1 + drivers/phy/mt76x8-usb-phy.c | 225 +++++-- drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/mtmips/Kconfig | 13 + drivers/pinctrl/mtmips/Makefile | 7 + drivers/pinctrl/mtmips/pinctrl-mt7628.c | 585 ++++++++++++++++++ .../pinctrl/mtmips/pinctrl-mtmips-common.c | 87 +++ .../pinctrl/mtmips/pinctrl-mtmips-common.h | 53 ++ drivers/reset/Kconfig | 7 + drivers/reset/Makefile | 1 + drivers/reset/reset-mtmips.c | 82 +++ drivers/serial/serial.c | 2 + drivers/serial/serial_mtk.c | 223 ++++++- drivers/spi/mt7621_spi.c | 247 ++++---- .../configs/gardena-smart-gateway-mt7688.h | 2 +- include/configs/linkit-smart-7688.h | 2 +- include/dt-bindings/clock/mt7628-clk.h | 37 ++ include/dt-bindings/reset/mt7628-reset.h | 36 ++ 35 files changed, 1929 insertions(+), 329 deletions(-) create mode 100644 drivers/clk/mtmips/Makefile create mode 100644 drivers/clk/mtmips/clk-mt7628.c
Quoted 9 lines
create mode 100644 drivers/pinctrl/mtmips/Kconfig create mode 100644 drivers/pinctrl/mtmips/Makefile create mode 100644 drivers/pinctrl/mtmips/pinctrl-mt7628.c create mode 100644 drivers/pinctrl/mtmips/pinctrl-mtmips-common.c create mode 100644 drivers/pinctrl/mtmips/pinctrl-mtmips-common.h create mode 100644 drivers/reset/reset-mtmips.c create mode 100644 include/dt-bindings/clock/mt7628-clk.h create mode 100644 include/dt-bindings/reset/mt7628-reset.h
series applied to u-boot-mips, thanks.
Signature · 1 line
- Daniel