Skip to content

omap4: sdp: convert to device model

Peter Ujfalusi u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] omap4: sdp: convert to device model
Quoted 5 lines · Peter Ujfalusi

Hi,

The series is based on Tero's omap4 panda and omap5 uevm device model conversion patches.

Quoted 8 lines

To avoid removal of the SDP4430 due to neglect.
With these patches applied no more complaints about DM_SPL conversion and the board boots up Linux.
We never had ethernet support for spd4430 in mainline (ks8851 on spi bus), this is still the case.

Linux boots up, but for some reason ethernet is not responsible, that needs to be investigated, unlikely caused by u-boot.

Actually it works in Linux.

Quoted 11 lines

I really like to keep sdp4430/Blaze support as it is the platform where I can test DMIC and other audio features of McPDM/twl6040. The board also have dual LCD, which is a nice thing to have.

Regards,
Peter
---
Peter Ujfalusi (2):
omap4: Copy device tree from Linux 5.7.y for SDP4430
omap4: sdp: convert to device model

Quoted 9 lines
 arch/arm/dts/Makefile               |   4 +
 arch/arm/dts/omap4-sdp-es23plus.dts |  14 +
 arch/arm/dts/omap4-sdp.dts          | 713 ++++++++++++++++++++++++++++
 board/ti/sdp4430/sdp.c              |  12 +
 configs/omap4_sdp4430_defconfig     |   8 +
 5 files changed, 751 insertions(+)
 create mode 100644 arch/arm/dts/omap4-sdp-es23plus.dts
 create mode 100644 arch/arm/dts/omap4-sdp.dts

- P?ter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki