Skip to content

RFC : Add StorCenter port to arch/powerpc

Jon Loeliger linuxppc-dev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest3 patches 9 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3Add StorCenter DTS first draft.arch/powerpc/boot/dts/storcenter.dts+159 -02 replies
2/3Add initial iomega StorCenter board port.arch/powerpc/boot/Makefile arch/powerpc/boot/cuboot-824x.c arch/powerpc/platforms/embedded6xx/Kconfig +2 more+227 -35 replies
3/3Add initial storcenter config file.arch/powerpc/configs/storcenter_defconfig+1538 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC PATCH 0/3]: Add StorCenter port to arch/powerpc

Guys,

I have the bulk of a port for the iomega StorCenter that Andy and I have been working on. We'd like your feedback!

Specifically, it's not quite working yet, and for lack of actually getting serial output, we're having some difficulty still. I post it here in a desperate attempt to let some eagle-eyed person point out my obvious "D'oh" problem.

Thanks,
jdl

 arch/powerpc/boot/Makefile                      |    3 +-
 arch/powerpc/boot/cuboot-824x.c                 |   52 +
 arch/powerpc/boot/dts/storcenter.dts            |  159 +++
 arch/powerpc/configs/storcenter_defconfig       | 1538 +++++++++++++++++++++++
 arch/powerpc/platforms/embedded6xx/Kconfig      |   15 +-
 arch/powerpc/platforms/embedded6xx/Makefile     |    2 +
 arch/powerpc/platforms/embedded6xx/storcenter.c |  158 +++
 7 files changed, 1924 insertions(+), 3 deletions(-)

Read the cover letter in its thread