Skip to content

net: dsa: mt7530: updates for phylink changes

Russell King (Oracle) linux-arm-kernel linux-mediatek netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 9 patches 1 replyIn review

Patches in v1 No applies recorded yet

None of the 9 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchMarek Behún
SeriesT-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH net-next 0/9] net: dsa: mt7530: updates for phylink changes

Hi,

This revised series is a partial conversion of the mt7530 DSA driver to the modern phylink infrastructure. This driver has some exceptional cases which prevent - at the moment - its full conversion (particularly with the Autoneg bit) to using phylink_generic_validate().

Patch 1 fixes the incorrect test highlighted in the first RFC series.

Patch 2 fixes the incorrect assumption that RGMII is unable to support 1000BASE-X.

Patch 3 populates the supported_interfaces for each port

Patch 4 removes the interface checks that become unnecessary as a result of patch 3.

Patch 5 removes use of phylink_helper_basex_speed() which is no longer required by phylink.

Patch 6 becomes possible after patch 5, only indicating the ethtool modes that can be supported with a particular interface mode - this involves removing some modes and adding others as per phylink documentation.

Patch 7 switches the driver to use phylink_get_linkmodes(), which moves the driver as close as we can to phylink_generic_validate() due to the Autoneg bit issue mentioned above.

Patch 8 converts the driver to the phylink pcs support, removing a bunch of driver private indirected methods. We include TRGMII as a PCS even though strictly TRGMII does not have a PCS. This is convenient to allow the change in patch 9 to be made.

Patch 9 moves the special autoneg handling to the PCS validate method, which means we can convert the MAC side to the generic validator.

Patch 10 marks the driver as non-legacy.

The series was posted on 23 February, and a ping sent on 3 March, but no feedback has been received. The previous posting also received no feedback on the actual patches either.

 drivers/net/dsa/mt7530.c | 330 +++++++++++++++++++++--------------------------
 drivers/net/dsa/mt7530.h |  26 ++--
 2 files changed, 159 insertions(+), 197 deletions(-)
Signature · 7 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek