net: dsa: mv88e6xxx: convert to phylink pcs
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 15 patches 1 replyIn review
Patches in v1 No applies recorded yet
None of the 15 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Marek Behún | Andrew Lunn |
|---|---|---|
| Series | T-b | R-b R-b R-b R-b R-b R-b R-b R-b R-b R-b R-b R-b R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH net-next 00/15] net: dsa: mv88e6xxx: convert to phylink pcs
Hi,
This series converts mv88e6xxx to use phylink pcs, which I believe is the last DSA driver that needs to be converted before we can declare the whole of DSA as non-phylink legacy.
Briefly:
Patches 1 and 2 introduce a new phylink_pcs_inband() helper to indicate whether inband AN should be used. Note that the first patch fixes a bug in the current c22 helper where the SGMII exchange with the PHY would be disabled when AN is turned off on the PHY copper side.
Patch 3 gets rid of phylink's internal pcs_ops member, preferring instead to always use the version in the phylink_pcs structure. Changing this pointer is now no longer supported.
Patch 4 makes PCS polling slightly cleaner, avoiding the poll being triggered while we're making changes to the configuration.
Patch 5 and 6 introduce several PCS methods that are fundamentally necessary for mv88e6xxx to work around various issues - for example, in some devices, the PCS must be powered down when the CMODE field in the port control register is changed. In other devices, there are workarounds that need to be performed.
Patch 7 adds unlocked mdiobus and mdiodev accessors to complement the locking versions that are already there - which are needed for some of the mv88e6xxx conversions.
Patch 8 prepares DSA as a whole, adding support for the phylink mac_prepare() and mac_finish() methods. These two methods are used to force the link down over a major reconfiguration event, which has been found by people to be necessary on mv88e6xxx devices. These haven't been required until now as everything has been done via the mac_config() callback - which won't be true once we switch to phylink_pcs.
Patch 9 implements patch 8 on this driver.
Patches 10 and 11 prepare mv88e6xxx for the conversion.
Patches 12 through to 14 convert each "serdes" to phylink_pcs.
Patch 15 cleans up after the conversion.
drivers/net/dsa/mv88e6xxx/Makefile | 3 + drivers/net/dsa/mv88e6xxx/chip.c | 480 ++++---------- drivers/net/dsa/mv88e6xxx/chip.h | 25 +- drivers/net/dsa/mv88e6xxx/pcs-6185.c | 158 +++++ drivers/net/dsa/mv88e6xxx/pcs-6352.c | 383 +++++++++++ drivers/net/dsa/mv88e6xxx/pcs-639x.c | 834 ++++++++++++++++++++++++ drivers/net/dsa/mv88e6xxx/port.c | 30 - drivers/net/dsa/mv88e6xxx/serdes.c | 1164 ++-------------------------------- drivers/net/dsa/mv88e6xxx/serdes.h | 110 +--- drivers/net/phy/mdio_bus.c | 24 +- drivers/net/phy/phylink.c | 141 ++-- include/linux/mdio.h | 26 + include/linux/phylink.h | 44 ++ include/net/dsa.h | 6 + net/dsa/port.c | 32 + 15 files changed, 1826 insertions(+), 1634 deletions(-)
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!