Skip to content

Raspberry Pi 32/64 support

Matthias Brugger u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest8 of 16 patches 0 repliesNew

8 of 16 patches are in this archive. The cover letter announces 16.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/16dts: Create a dtsi for BCM2835/6/7 specific configuration+0 -00 replies
2/16dts: Add initial support for bcm2838+0 -00 replies
4/16arm: mach-bcm283x: Define mbox address for BCM2838+0 -00 replies
5/16rpi: Add rpi_model entry for RaspberryPi 4+0 -00 replies
6/16dt-bindings: Define BCM2838_CLOCK_EMMC2 needed for RaspberryPi 4+0 -00 replies
8/16mmc: bcm2835_sdhci: Add support for bcm2711 device+0 -00 replies
12/16config: rpi4: Add defconfig for rpi4-32+0 -01 reply
13/16dts: bcm2838-rpi-4-b: Use the emmc2 interface for sdhci+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 00/16] Raspberry Pi 32/64 support
Quoted 3 lines · andrei at gherzan.ro

From: Andrei Gherzan <[email protected]>

This PR consolidates the work we've done to support the new Raspberry Pi

I don't understand why you posted these while you asked me if I'll submit them. That's not a good way to collaborate on upstream.

Please use get_maintainers.pl to see whom you have to send the patches to.

Quoted 18 lines

4 board. It also includes commits from
https://github.com/mbgg/u-boot.git (credits to Matthias Brugger).

Andrei Gherzan (13):
dts: Create a dtsi for BCM2835/6/7 specific configuration
dts: Add initial support for bcm2838
arm: mach-bcm283x: Define configs for RaspberryPi 4
arm: mach-bcm283x: Define mbox address for BCM2838
rpi: Add rpi_model entry for RaspberryPi 4
dt-bindings: Define BCM2838_CLOCK_EMMC2 needed for RaspberryPi 4
arm: bcm283x: Include definition for additional emmc clock
arm: bcm283x: Define device base addresses for bcm2835
config: rpi4: Add defconfig for rpi4-32
dts: bcm2838-rpi-4-b: Use the emmc2 interface for sdhci
rpi: Add memory map for bcm2838
configs: rpi4: Remove DWC2 and USB_ETHER configs
dts: bcm2838-rpi-4-b: Use the emmc2/2811 compatible string for SDHCI

Quoted 3 lines

Fabian Vogt (2):
bcm2835 video: Bail out early if querying video information fails bcm283x mbox: Correctly wait for space to send

Both not needed with FW at
025759b86 ("firmware: Rename hdmi_enable_4k to hdmi_enable_4kp60") Apart from that they have already been posted.

Quoted 30 lines

Matthias Brugger (1):
mmc: bcm2835_sdhci: Add support for bcm2711 device

 arch/arm/dts/Makefile                      |   4 +-
 arch/arm/dts/bcm2835-common.dtsi           |  53 +++++
 arch/arm/dts/bcm2835.dtsi                  |   1 +
 arch/arm/dts/bcm2836.dtsi                  |   1 +
 arch/arm/dts/bcm2837.dtsi                  |   1 +
 arch/arm/dts/bcm2838-rpi-4-b.dts           |  52 +++++
 arch/arm/dts/bcm2838.dtsi                  | 237 +++++++++++++++++++++
 arch/arm/dts/bcm283x.dtsi                  |  45 +---
 arch/arm/mach-bcm283x/Kconfig              |  35 +++
 arch/arm/mach-bcm283x/include/mach/mbox.h  |  13 +-
 arch/arm/mach-bcm283x/include/mach/sdhci.h |   4 +
 arch/arm/mach-bcm283x/include/mach/timer.h |   4 +
 arch/arm/mach-bcm283x/include/mach/wdog.h  |   4 +
 arch/arm/mach-bcm283x/mbox.c               |   6 +-
 board/raspberrypi/rpi/rpi.c                |  32 ++-
 configs/rpi_4_32b_defconfig                |  40 ++++
 configs/rpi_4_defconfig                    |   3 -
 drivers/mmc/bcm2835_sdhci.c                |  12 +-
 drivers/video/bcm2835.c                    |   4 +-
 include/dt-bindings/clock/bcm2835.h        |   2 +
 20 files changed, 494 insertions(+), 59 deletions(-)
 create mode 100644 arch/arm/dts/bcm2835-common.dtsi
 create mode 100644 arch/arm/dts/bcm2838-rpi-4-b.dts
 create mode 100644 arch/arm/dts/bcm2838.dtsi
 create mode 100644 configs/rpi_4_32b_defconfig