Skip to content

bump/choice for qt 5.8.0

Arnout Vandecappelle buildroot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest7 of 9 patches 0 repliesNew
  2. v15 patches 0 repliesSuperseded

7 of 9 patches are in this archive. The cover letter announces 9.

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/9qt5: add choice between version 5.6.2 and 5.8.0+0 -00 replies
1/9qt5: add choice between version 5.6.2 and 5.8.0+0 -00 replies
2/9qt5enginio : move into legacy compatibility+0 -00 replies
5/9qt5declarative: enable Quick for non-GL platforms for Qt 5.8.0+0 -03 replies
8/9python-pyqt5: Depend directly on Qt5 rather than its toolchain requirements+0 -01 reply
9/9package/python-pyqt5: add patch to fix build with Qt 5.8.0+0 -01 reply
9/9package/python-pyqt5: add patch to fix build with Qt 5.8.0+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v6 yet.

Read the v6 thread

Cover letter [Buildroot] [PATCH v6 0/9] bump/choice for qt 5.8.0
Quoted 44 lines · Andreas Naumann

Hi,

first of all, thanks everybody for taking over and pushing this further. My finding on this below..

Am 06.02.2017 um 16:40 schrieb Thomas Petazzoni:

Quoted 38 lines

Hello,

Quoted 1 line · Zoltan Gyarmati

The Qt 5.8 config (and pyqt5) was tested on Raspberry Pi.

As Arnout said we are trying to apply this patch series (or actually a subset of it). We have already fixed the comments that people have raised, and you can see the result at:

http://git.free-electrons.com/users/thomas-petazzoni/buildroot/log/?h=qt5-bump

Unfortunately, this fails to build with the following defconfig:

BR2_arm=y
BR2_cortex_a8=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5BASE_LICENSE_APPROVED=y
BR2_PACKAGE_QT5DECLARATIVE=y
BR2_PACKAGE_QT5IMAGEFORMATS=y
BR2_PACKAGE_QT5LOCATION=y
BR2_PACKAGE_QT5MULTIMEDIA=y
BR2_PACKAGE_QT5SENSORS=y
BR2_PACKAGE_QT5SERIALBUS=y
BR2_PACKAGE_QT5SVG=y
BR2_PACKAGE_QT5TOOLS=y
BR2_PACKAGE_QT5TOOLS_PIXELTOOL=y
BR2_PACKAGE_QT5TOOLS_QTDIAG=y
BR2_PACKAGE_QT5TOOLS_QTPATHS=y
BR2_PACKAGE_QT5TOOLS_QTPLUGININFO=y
BR2_PACKAGE_QT5WEBCHANNEL=y
BR2_PACKAGE_QT5ENGINIO=y

With the following error message during the qt5base build:

Project ERROR: Library 'libpng' is not defined.

Quoted 8 lines
Quoted 1 line

Could you take our branch, and see why there is this build failure ?

I have tried your branch and defconfig and see the same failure. Unfortunately I have no idea why it happens, I have never observed that problem.

There are reports about these kind of problem, but without a hint for the real reason.
https://bugreports.qt.io/browse/QTBUG-57148

That's something else, it happens while building the bundled freetype which we
don't do.

Quoted 1 line

https://bugreports.qt.io/browse/QTBUG-57794

That one looks like the same issue.

Quoted 4 lines

After fiddling a little, I can get over it by selecting BR2_PACKAGE_QT5BASE_FONTCONFIG. Unfortunately I run out of time debugging further for now.

Since it would be really nice to have Qt5.8 in 2017.02, I wouldn't mind working
around it with

# Not clear why this is needed, the build fails without it select BR2_PACKAGE_QT5BASE_FONTCONFIG if BR2_PACKAGE_QT5_VERSION_LATEST

to BR2_PACKAGE_QT5BASE_PNG. Thomas and I looked at it as well for a little while and couldn't come up with an explanation.

It would be good however to report our findings in QTBUG-57794.

Regards,
Arnout

Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF