net: phylink: support !autoneg configuration for SFPs
Status from this message: This series was applied to netdev/net-next.git (main)
Get series with b4
b4 am [email protected]Versions newest first
Patches in v1 Applied
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Maxime Chevallier |
|---|---|
| Series | R-b T-b R-b T-b R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH net-next 0/3] net: phylink: support !autoneg configuration for SFPs
This series comes from discussion during a patch series that was posted at the beginning of April, but these patches were never posted (I was too busy!)
We restrict ->sfp_interfaces to those that the host system supports, and ensure that ->sfp_interfaces is cleared when a SFP is removed. We then add phylink_sfp_select_interface_speed() which will select an appropriate interface from ->sfp_interfaces for the speed, and use that in our phylink_ethtool_ksettings_set() when a SFP bus is present on a directly connected host (not with a PHY.)
drivers/net/phy/phylink.c | 60 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 54 insertions(+), 6 deletions(-)
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!