Skip to content

net: phy: disable EEE on TI PHYs

Russell King (Oracle) netdev 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest0 of 2 patches 2 repliesIn review
  2. v10 of 2 patches 0 repliesSuperseded

Changes in v2 from the cover letter

- integrate Oleksij Rempel's review comments, and merge update into patch 2 to allow EEE on non-1G variants.

Patches in v2 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchOleksij Rempel
SeriesR-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH net-next v2 0/2] net: phy: disable EEE on TI PHYs

Hi,

Towards the end of October, we discussed EEE on TI PHYs which seems to cause problems with the stmmac hardware. This problem was never fully diagnosed, but it was identified that TI PHYs do not support LPI signalling, but report that EEE is supported, and they implement the advertisement registers and that functionality.

This series allows PHY drivers to disable EEE support.

v2:
- integrate Oleksij Rempel's review comments, and merge update into patch 2 to allow EEE on non-1G variants.

 drivers/net/phy/dp83867.c    |  1 +
 drivers/net/phy/dp83869.c    |  1 +
 drivers/net/phy/phy-core.c   |  2 --
 drivers/net/phy/phy_device.c | 32 +++++++++++++++++++++++++++++---
 include/linux/phy.h          |  1 +
 5 files changed, 32 insertions(+), 5 deletions(-)
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!