Skip to content

OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two

Santosh Shilimkar linux-arm-kernel linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 of 11 patches 0 repliesNew

2 of 11 patches are in this archive. The cover letter announces 11.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/11OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions+0 -01 reply
1/11OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions+0 -00 replies

Reviews trailers per patch

None of the 2 patches has a Reviewed-by or Acked-by.

PatchSantosh Shilimkar
SeriesT-b
1/11
1/11

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two

Paul,

Quoted 18 lines

-----Original Message-----
From: Paul Walmsley [mailto:paul at pwsan.com]
Sent: Wednesday, December 08, 2010 11:48 AM
To: linux-omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org
Cc: Mark Brown; Beno?t Cousson; Kevin Hilman; Rajendra Nayak; Peter Ujfalusi; Santosh Shilimkar; Jarkko Nikula; Liam Girdwood
Subject: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two

This patch series, intended for 2.6.38:

- adds OMAP4-specific PRM and CM instance functions, which are capable of writing to PRM/CM instances, no matter what PRCM partition they appear in;

- renames the old OMAP2/3 PRM and CM functions to prefix them with 'omap2_';

Quoted 6 lines

- adds OMAP4 clockdomain offset addressing to the OMAP4 clockdomain definitions;

- removes the (now unused) OMAP clockdomain .clkstctrl_reg field;

- moves plat-omap/include/plat/{clock,power}domain.h to mach-omap2/,

since

Quoted 3 lines

these are OMAP2-specific;

- moves the OMAP3 SCM padconf save code from pm34xx.c into the SCM

common

Quoted 15 lines

code.

This series is available via git from git://git.pwsan.com/linux-2.6 in the branch 'pwrdm_prcm_b_2.6.38'. It applies on top of the "OMAP:
PRCM/powerdomain/clockdomain patches for 2.6.38, part one" series, sent earlier.

Kevin and OMAP ASoC-hackers, I'd appreciate review and acks, if appropriate, on the patches that touch code that you maintain. TI OMAP4 PM people, I would appreciate any testing assistance that you may be able to provide. Beno?t, I've tried to keep the kernel data files and the output of the scripts relatively similar, but we might need to do some tweaking of the scripts or data files to align them in the way that makes the most sense.

Quoted 3 lines

Boot-tested on N800, OMAP35xx Beagle, and OMAP4430ES2 Panda.

Have tested both part1 and part2 of your series on OMAP4 and OMAP3 SDPs. OFF mode works on OMAP3 SPD with this series.
Was planning to do some more testing with some porting of OMAP4 PM but it's taking bit more time.

Regards,
Santosh