spi: driver for Cirrus EP93xx SPI controller
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest3 patches 0 repliesNew
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | spi: implemented driver for Cirrus EP93xx SPI controllerarch/ drivers/ drivers/ +1 more | +1066 | 1 reply | |
| 1/3 | spi: implemented driver for Cirrus EP93xx SPI controller | +0 | 0 replies | |
| 2/3 | ep93xx: added chip revision reading functionarch/ arch/ | +37 | 4 replies | |
| 2/3 | ep93xx: added chip revision reading function | +0 | 0 replies | |
| 3/3 | ep93xx: SPI driver platform support codearch/ arch/ arch/ +1 more | +66 | 1 reply |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/3] spi: driver for Cirrus EP93xx SPI controller
Hello,
This series provides SPI master controller driver implementation for Cirrus Logic EP93xx controllers.
I've tested this on my TS-7260 board with SPI EEPROM (through at25 driver) and with few SD/MMC cards that I own (through mmc_spi driver). Unfortunately I don't have other SPI devices so if someone wants to try this, it would be great (see [1] for example code that I used with MMC cards).
This series applies on top of Linus' 2.6.34-rc1.
Please review.
Thanks,
MW
Mika Westerberg (3):
spi: implemented driver for Cirrus EP93xx SPI controller
ep93xx: added chip revision reading function
ep93xx: SPI driver platform support code
arch/arm/mach-ep93xx/clock.c | 21 + arch/arm/mach-ep93xx/core.c | 68 ++ arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 1 + arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h | 34 + arch/arm/mach-ep93xx/include/mach/platform.h | 13 + drivers/spi/Kconfig | 11 + drivers/spi/Makefile | 1 + drivers/spi/ep93xx_spi.c | 1020 +++++++++++++++++++++++ 8 files changed, 1169 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h create mode 100644 drivers/spi/ep93xx_spi.c
---
[1] sample code for using SD cards with TS-7260:
arch/arm/mach-ep93xx/ts72xx.c +104 -0
@@ -14,11 +14,15 @@#include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio.h> #include <linux/m48t86.h> #include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/eeprom.h> #include <mach/hardware.h> #include <mach/ts72xx.h> +#include <mach/ep93xx_spi.h> #include <asm/mach-types.h> #include <asm/mach/map.h>
@@ -190,6 +194,105 @@ static struct ep93xx_eth_data ts72xx_eth_data = { .phy_id = 1, }; +static const struct spi_board_info ts72xx_spi_devices[]__initconst = { + { + .modalias ="mmc_spi" , + .max_speed_hz =10 *1000 *1000 , + .bus_num =0 , + .chip_select =1 , + .mode =SPI_MODE_0 , + }, +}; + +/* +* Mapping of SPI chip selects to GPIO pins. In TS-72xx we have GPIO lines +* 8-15 wired into DIO1 header which can be used as chip selects. +*/ +static const unsigned ts72xx_spi_chip_selects[] = { + [0 ] =EP93XX_GPIO_LINE_EGPIO8 , + [1 ] =EP93XX_GPIO_LINE_EGPIO9 , +/* +* Add more here as needed. +*/ +}; + +static inline unsigned cs_to_gpio (unsigned cs) +{ +BUG_ON (cs >=ARRAY_SIZE (ts72xx_spi_chip_selects)); +return ts72xx_spi_chip_selects[cs]; +} + +static void ts72xx_spi_cs_control (unsigned cs,unsigned value,void *data) +{ + (void )data; +gpio_set_value (cs_to_gpio (cs), value); +} + +static struct ep93xx_spi_info ts72xx_spi_info = { + .num_chipselect =ARRAY_SIZE (ts72xx_spi_chip_selects), + .cs_control = ts72xx_spi_cs_control, +}; + +/** +* ts72xx_init_spi() - initializes board SPI devices +* +* This function initializes all the SPI devices declared in ts72xx_spi_devices +* array. It also allocates GPIO line as chip selects for each device. Chip +* selects are declared in ts72xx_spi_chip_selects array. +*/ +static void __init ts72xx_init_spi (void ) +{ +unsigned gpio; +int i, err; + +/* +* Now go through all SPI peripherals that board wants to register +* and acquire gpio for every chip select. +*/ +for (i =0 ; i <ARRAY_SIZE (ts72xx_spi_devices); i++) { + gpio =cs_to_gpio (ts72xx_spi_devices[i].chip_select); + + err =gpio_request (gpio,"ep93xx-spi" ); +if (err) { +pr_err ("failed to allocate GPIO%d\n" , gpio); + goto fail; + } + +/* +* We default chip selects to be active low. This can be +* changed by the protocol drivers passing SPI_CS_HIGH flag +* to ep93xx-spi driver. The driver then changes the value +* by using info->cs_control(). +*/ + err =gpio_direction_output (gpio,1 ); +if (err) { +pr_err ("failed to configure GPIO%d\n" , gpio); + goto fail; + } + } + + err =spi_register_board_info (ts72xx_spi_devices, +ARRAY_SIZE (ts72xx_spi_devices)); +if (err) { +pr_err ("failed to register SPI devices\n" ); + goto fail; + } + + err =ep93xx_register_spi (&ts72xx_spi_info); +if (err) { +pr_err ("failed to register SPI platform device\n" ); + goto fail; + } + +return ; + +fail: +while (--i >=0 ) { + gpio =cs_to_gpio (ts72xx_spi_devices[i].chip_select); +gpio_free (gpio); + } +} +static void __init ts72xx_init_machine (void ) {ep93xx_init_devices ();
@@ -198,6 +301,7 @@ static void __init ts72xx_init_machine(void)platform_device_register (&ts72xx_wdt_device);ep93xx_register_eth (&ts72xx_eth_data,1 ); +ts72xx_init_spi (); }MACHINE_START (TS72XX ,"Technologic Systems TS-72xx SBC" )