Skip to content

mxc: mx51: Add support for efikamx nettop

Amit Kucheria linux-arm-kernel 2 versions New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 0 repliesNew
  2. v13 patches 0 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2mx51: Move OTG initialisation for all boards to a single filearch/arm/mach-mx5/Makefile arch/arm/mach-mx5/board-cpuimx51.c arch/arm/mach-mx5/board-mx51_babbage.c +2 more+50 -551 reply
2/2mx51: add support for genesi efikamx nettoparch/arm/mach-mx5/Kconfig arch/arm/mach-mx5/Makefile arch/arm/mach-mx5/board-mx51_efikamx.c+104 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCHv2 0/2] mxc: mx51: Add support for efikamx nettop

The following patches add basic support for the Genesi EfikaMX nettop[1]. Serial port, USB OTG and Ethernet works.

The new machine name has been agreed with Russell[2].

Kernel tested on babbage 3.0 and efikamx boards.
Patches apply to the imx git tree.

Regards,
Amit

[1] http://www.genesi-usa.com/
[2] http://www.spinics.net/lists/arm-kernel/msg98960.html

Amit Kucheria (2):
mx51: Move OTG initialisation for all boards to a single file
mx51: add support for genesi efikamx nettop

 arch/arm/mach-mx5/Kconfig              |    8 +++
 arch/arm/mach-mx5/Makefile             |    3 +-
 arch/arm/mach-mx5/board-cpuimx51.c     |   30 +---------
 arch/arm/mach-mx5/board-mx51_babbage.c |   30 +---------
 arch/arm/mach-mx5/board-mx51_efikamx.c |   95 ++++++++++++++++++++++++++++++++
 arch/arm/mach-mx5/usb.c                |   42 ++++++++++++++
 arch/arm/mach-mx5/usb.h                |    1 +
 7 files changed, 154 insertions(+), 55 deletions(-)
 create mode 100644 arch/arm/mach-mx5/board-mx51_efikamx.c
 create mode 100644 arch/arm/mach-mx5/usb.c
 create mode 100644 arch/arm/mach-mx5/usb.h