Skip to content

RFC arm/kirkwood: add dreamplug support.

linux_arm at lakedaemon.net linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2arm/kirkwood: TEMP hack till mach-types is updated.arch/arm/tools/mach-types+1 -00 replies
2/2arm/kirkwood: add dreamplug support.arch/arm/mach-kirkwood/Kconfig arch/arm/mach-kirkwood/Makefile arch/arm/mach-kirkwood/dreamplug-setup.c+151 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2 RFC] arm/kirkwood: add dreamplug support.

From: Jason Cooper <[email protected]>

All,

This is an RFC patch series until mach-types is updated. This compiles, loads, runs, and sees the SPI flash.

Concerns:

- I sent an email to rmk a day or two ago regarding updating the mach-types, but haven't heard. I know he's busy, just wanted to make sure I was doing it right. I requested it here [1].

- I haven't had a chance to confirm the LED mappings are correct.

- Once the mach-types are updated, I'll drop the first patch, it's just for folks who want to try the series and have it build and run.

[1] http://www.arm.linux.org.uk/developer/machines/list.php?id=3550

Jason Cooper (2):
arm/kirkwood: TEMP hack till mach-types is updated. arm/kirkwood: add dreamplug support.

 arch/arm/mach-kirkwood/Kconfig           |    6 ++
 arch/arm/mach-kirkwood/Makefile          |    1 +
 arch/arm/mach-kirkwood/dreamplug-setup.c |  144 ++++++++++++++++++++++++++++++
 arch/arm/tools/mach-types                |    1 +
 4 files changed, 152 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-kirkwood/dreamplug-setup.c