Skip to content

ARM: tegra: paz00: updates for "for-next"

Marc Dietrich linux-arm-kernel linux-tegra 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5ARM: tegra: paz00: add support serial port on JP1arch/arm/mach-tegra/board-paz00.c+11 -00 replies
2/5ARM: tegra: paz00: enable rfkill for internal wifi cardarch/arm/mach-tegra/board-paz00-pinmux.c arch/arm/mach-tegra/board-paz00.c arch/arm/mach-tegra/board-paz00.h+30 -40 replies
3/5ARM: tegra: paz00: enable wifi ledarch/arm/mach-tegra/board-paz00-pinmux.c arch/arm/mach-tegra/board-paz00.c arch/arm/mach-tegra/board-paz00.h+24 -00 replies
4/5ARM: tegra: paz00: add clocks required for usb operationarch/arm/mach-tegra/board-paz00.c+5 -09 replies
5/5ARM: tegra: paz00: reorder the SDHCI channel initarch/arm/mach-tegra/board-paz00.c+1 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/5] ARM: tegra: paz00: updates for "for-next"

Colin,

this is an update to the patches I send on July 15th. There are now five patches which add the second serial port (some solder points on the mainboard) and Wifi support (rfkill and LED) to PAZ00. Additionally, usb support is improved and the SDHCI init order is changed.

Please queue them up for "for-next" after positive review of course.

Thanks

Marc

Marc Dietrich (5):
ARM: tegra: paz00: add support serial port on JP1
ARM: tegra: paz00: enable rfkill for internal wifi card
ARM: tegra: paz00: enable wifi led
ARM: tegra: paz00: add clocks required for usb operation
ARM: tegra: paz00: reorder the SDHCI channel init

 arch/arm/mach-tegra/board-paz00-pinmux.c |    3 ++
 arch/arm/mach-tegra/board-paz00.c        |   57 +++++++++++++++++++++++++++++-
 arch/arm/mach-tegra/board-paz00.h        |   16 ++++++--
 3 files changed, 71 insertions(+), 5 deletions(-)
Signature · 1 line
1.7.4.1