meta: Add cedartrail

From: Rahul Saxena <[email protected]>

This is the initial version of a BSP for the Cedar Trail platform. The Cedar Trail platform consists of the Intel Cedarview Atom processor and Tiger Point Chipset. I have succesfully booted Sato image on Cedar Trail CRB, desktop and mobile pre-production sample boards and tested features such as wired networking, VESA graphics, SATA, USB ports

Please pull into linux-yocto-3.0/meta and linux-yocto-dev/meta

Also, please create a new "yocto/standard/cedarview" machine branch in each of the above, based on yocto/standard/base.

Thanks
Rahul

Signed=off-by: Rahul Saxena <[email protected]>
---

The following changes since commit caa74f86f42f6ecc22c3e9f380176b2695579e18:
Darren Hart (1):
Add EFI scc and cfg files

are available in the git repository at:

git://git.yoctoproject.org/linux-yocto-2.6.37-contrib rsaxena/meta-cedartrail
http://git.yoctoproject.org/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=rsaxena/meta-cedartrail

Rahul Saxena (1):
meta: Add cedartrail Signed-off-by: Rahul Saxena
<[email protected]>

 .../bsp/cedartrail/cedartrail-preempt-rt.scc       |    7 +++
 .../bsp/cedartrail/cedartrail-standard.scc         |    7 +++
 .../cfg/kernel-cache/bsp/cedartrail/cedartrail.cfg |   58 ++++++++++++++++++++
 .../cfg/kernel-cache/bsp/cedartrail/cedartrail.scc |   17 ++++++
 4 files changed, 89 insertions(+), 0 deletions(-)
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-preempt-rt.scc
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail.cfg
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail.scc