Adapt GPMC peripherals, platforms to driver

Hi,

This series provides new interface for GPMC peripherals that use helper functions for initialization and configures omap3evm & beagleboard GPMC in Kernel. Existing interface would continue to serve its purpose as before.

New interface for smsc911x has been provided the runtime timing calculation capability. This had to be tested on different boards. omap3evm has been converted to use this new smsc911x runtime calculation capability, thus is being configured in Kernel.

beagleboard nand has been modified to use new interface in addition to making use of runtime calculation, and is being configured in Kernel

This series is based on 3.5-rc1, and is dependent on [1,2,3,4] and has been tested on omap3evm (smsc911x) rev G & C and beagle board(nand)

Also using private patches, nand & onenand was tested on omap3evm, rev G & C respectively (as support for these were not in mainline)

omap3evm & beagleboard are the two boards that could be tested here. Within a couple of days, series for converting other boards (but which can't be tested) would be posted (unless there are strong objections to the way these patch series are going) along with updation of feature-removal-schedule.txt regarding deprecation of GPMC bootloader dependency (feature-removal-schedule.txt patch would make sense only with the modification of remaining boards to work gpmc driver)

Regards
Afzal

[1] http://www.mail-archive.com/linux-omap at vger.kernel.org/msg69501.html
[2] http://www.mail-archive.com/linux-omap at vger.kernel.org/msg69881.html
[3] http://www.mail-archive.com/linux-omap at vger.kernel.org/msg69891.html
[4] http://www.mail-archive.com/linux-omap at vger.kernel.org/msg69897.html

Afzal Mohammed (9):
ARM: OMAP2+: gpmc-nand: Adapt to use gpmc driver
ARM: OMAP2+: gpmc-onenand: Adapt to use gpmc driver
ARM: OMAP2+: flash: Adapt to use gpmc driver
ARM: OMAP2+: gpmc-tusb6010: Adapt to use gpmc driver
ARM: OMAP2+: gpmc-smc91x: Adapt to use gpmc driver
ARM: OMAP2+: gpmc-smsc911x: Adapt to use gpmc driver
ARM: OMAP2+: gpmc-smsc911x: runtime time calculation
ARM: OMAP2+: board omap3evm: use gpmc driver
ARM: OMAP2+: board omap3beagle: use gpmc driver

 arch/arm/mach-omap2/board-flash.c               |  126 +++++++++++++++++++++++
 arch/arm/mach-omap2/board-flash.h               |   29 ++++++
 arch/arm/mach-omap2/board-omap3beagle.c         |   16 ++-
 arch/arm/mach-omap2/board-omap3evm.c            |   12 ++-
 arch/arm/mach-omap2/gpmc-nand.c                 |   41 ++++++++
 arch/arm/mach-omap2/gpmc-onenand.c              |  117 ++++++++++++++++++---
 arch/arm/mach-omap2/gpmc-smc91x.c               |   69 +++++++++++--
 arch/arm/mach-omap2/gpmc-smsc911x.c             |  119 +++++++++++++++++++++
 arch/arm/mach-omap2/usb-tusb6010.c              |  113 +++++++++++++++++++-
 arch/arm/plat-omap/include/plat/gpmc-smc91x.h   |   12 ++-
 arch/arm/plat-omap/include/plat/gpmc-smsc911x.h |   25 ++++-
 arch/arm/plat-omap/include/plat/gpmc.h          |    8 ++
 arch/arm/plat-omap/include/plat/nand.h          |    7 ++
 arch/arm/plat-omap/include/plat/onenand.h       |    8 +-
 14 files changed, 662 insertions(+), 40 deletions(-)

1.7.10.2