RFC ACPICA: 64bit FADT addresses enabling.

From: Lv Zheng <[email protected]>

This series enable 64-bit addresses on top of linux-pm.git/linux-next.

Commit 0249ed2444d6 (ACPICA: Add option to favor 32-bit FADT addresses.) breaks resuming from system-suspend on the Intel DP45SG board.

This is because the commit has changed the default behavior of original Linux. And the root cause is:
1. BIOS may favor the FACS reported via the "FIRMWARE_CTRL" field in the FADT while the commit doesn't set the firmware waking vector address of the FACS reported by "FIRMWARE_CTRL", it only sets the firware waking vector address of the FACS reported by "X_FIRMWARE_CTRL" or
2. BIOS may favor the 64-bit FACS waking vector address when the version of the FACS is greater than 0 while Linux currently only supports resuming from the real mode, so the 64-bit firmware waking vector is not tested and set to 0.

This patchset fixes this issue by excluding the above 2 cases and re-enables 64-bit FADT addresses again using the following smarter way:
1. Restore old behavior of 32-bit favor for FADT;
2. To exclude cause 1:
Add 64-bit firmware waking vector setting support for selected FACS, the 64-bit firmware waking vector favor is also controlled by the new acpi_set_firmware_waking_vector() parameter. OSPM that supports 32-bit waking environment can set a valid physical address here. For Linux which only supports real mode waking environment, this should be 0.
3. Fix 32-bit FACS favor by loading both 32-bit and 64-bit FACS, the selection of FACS is controlled by a new global option - acpi_gbl_use32_bit_facs_addresses, which is set to TRUE to select the FACS reported by "FIRMWARE_CTRL" field. Add firmware waking vector setting support for both 32-bit and 64-bit FACS. This is used to work around the reported platform where 2 FACS is reported in the FADT;
4. Restore new behavior of 64-bit favor for FADT.
So that it is ensured that the 32-bit firmware waking vector address of the FACS reported by "FIRMWARE_CTRL" filed is still set after enabling 64-bit FADT addresses favor.
To enable X_FIRMWARE_CTRL favor and 64-bit firmware waking vector favor, OSPMs are required to set acpi_gbl_use32_bit_facs_addresses to FALSE and pass a valid 64-bit firmware waking vector address for acpi_set_firmware_waking_vector() invocations, thus now the FACS favor and the 64-bit firmware waking vector support can be completely controlled by OSPMs and ACPICA does not make any decision silently.

Lv Zheng (6):
ACPICA: Hardware: Reduce divergences for sleep functions.
ACPICA: Hardware: Enable 64-bit firmware waking vector for selected
FACS.
ACPI: sleep: Update acpi_set_firmware_waking_vector() invocations to
favor 32-bit firmware waking vector.
ACPICA: Tables: Enable both 32-bit and 64-bit FACS.
ACPICA: Hardware: Enable firmware waking vector for both 32-bit and

    64-bit FACS.

ACPICA: Tables: Enable default 64-bit FADT addresses favor.

 arch/ia64/include/asm/acpi.h    |    1 +
 arch/x86/include/asm/acpi.h     |    3 +-
 drivers/acpi/acpica/acglobal.h  |    2 +
 drivers/acpi/acpica/aclocal.h   |    1 +
 drivers/acpi/acpica/hwxfsleep.c |   83 +++++++++++++++++++++++++--------------
 drivers/acpi/acpica/tbfadt.c    |   21 ++++++----
 drivers/acpi/acpica/tbutils.c   |   37 +++++++++++------
 drivers/acpi/acpica/tbxfload.c  |    3 +-
 drivers/acpi/sleep.c            |    8 +++-
 include/acpi/acpixf.h           |   24 ++++++-----
 10 files changed, 121 insertions(+), 62 deletions(-)

1.7.10