Skip to content

ARM: mvebu: Use Hardware BCH ECC for RN104 and RN2120

Arnaud Ebalard linux-arm-kernel linux-devicetree linux-mtd 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2ARM: mvebu: Netgear RN104: Use Hardware BCH ECCarch/arm/boot/dts/armada-370-netgear-rn104.dts+4 -01 reply
1/2ARM: mvebu: Netgear RN104: Use Hardware BCH ECC+0 -00 replies
2/2ARM: mvebu: Netgear RN2120: Use Hardware BCH ECCarch/arm/boot/dts/armada-xp-netgear-rn2120.dts+4 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] ARM: mvebu: Use Hardware BCH ECC for RN104 and RN2120

Hi,

Following Ben's report and fix for RN102, I did some tests on RN104 and RN2120 (they have the same Hynix H27U1G8F2BTR flash and setup) and came up w/ the exact same fixes for their respective .dts files. With those patches, it is now possible to update kernel from userland and u-boot will happily load and boot it on those devices.

Both patches should be candidates for stable, I guess.

Cheers,

a+

Arnaud Ebalard (2):
ARM: mvebu: Netgear RN104: Use Hardware BCH ECC
ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC

 arch/arm/boot/dts/armada-370-netgear-rn104.dts | 4 ++++
 arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 4 ++++
 2 files changed, 8 insertions(+)
Signature · 1 line
2.1.0