Skip to content

BAT: Add Basic Audio Tester command line tool

[email protected] alsa-devel 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest7 patches 5 repliesIn review
  2. v17 patches 18 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/7BAT: Add initial functionsbat/bat.c+603 -03 replies
2/7BAT: Add common definitions and functionsbat/common.c bat/common.h+374 -01 reply
3/7BAT: Add playback and record functionsbat/alsa.c bat/alsa.h+614 -00 replies
4/7BAT: Add signal generatorbat/signal.c bat/signal.h+212 -00 replies
5/7BAT: Add converting functionsbat/convert.c bat/convert.h+136 -00 replies
6/7BAT: Add spectrum analysis functionsbat/analyze.c bat/analyze.h+330 -00 replies
7/7BAT: Add Makefile and configuresMakefile.am bat/Makefile.am configure.ac+35 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH V2 0/7] BAT: Add Basic Audio Tester command line tool

From: "Lu, Han" <[email protected]>

BAT (Basic Audio Tester) is a simple command line utility intended to automate audio driver and sound server QA testing with no human interaction.

BAT works by playing an audio stream and capturing the same stream in either a digital or analog loop back. It then compares the captured stream to the original to determine if the test case passes or fails.

The main idea of frequency detecting is:
The analysis function reads data from WAV file, run FFT against the data to get magnitude of frequency vectors, and then calculates the average value and standard deviation of frequency vectors. After that, we define a threshold:
threshold = 3 * standard_deviation + average_value
Frequencies with amplitude larger than threshold will be recognized as a peak, and the frequency with largest peak value will be recognized as a detected frequency.
BAT then compares the detected frequency to target frequency, to decide if the detecting passes or fails.

BAT supports 4 working modes:
1. Single line playback;
2. Single line capture and analysis;
3. Playback and capture in loop, and analyze captured data;
4. Local analyze without actual playback or capture.
BAT will check devices input by user to decide which mode to use. BAT will create threads for playback and record, and will run spectrum analysis for mode 2, 3 or 4.

Changes on V2:
1. Adopt Caleb Crome's method to generate sine signal to avoids unwanted distortion on waveform.

Lu, Han (7):
BAT: Add initial functions
BAT: Add common definitions and functions
BAT: Add playback and record functions
BAT: Add signal generator
BAT: Add converting functions
BAT: Add spectrum analysis functions
BAT: Add Makefile and configures

 Makefile.am     |   3 +
 bat/Makefile.am |  14 ++
 bat/alsa.c      | 594 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 bat/alsa.h      |  20 ++
 bat/analyze.c   | 314 +++++++++++++++++++++++++++++
 bat/analyze.h   |  16 ++
 bat/bat.c       | 603 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 bat/common.c    | 198 +++++++++++++++++++
 bat/common.h    | 176 +++++++++++++++++
 bat/convert.c   | 113 +++++++++++
 bat/convert.h   |  23 +++
 bat/signal.c    | 182 +++++++++++++++++
 bat/signal.h    |  30 +++
 configure.ac    |  19 +-
 14 files changed, 2304 insertions(+), 1 deletion(-)
 create mode 100644 bat/Makefile.am
 create mode 100644 bat/alsa.c
 create mode 100644 bat/alsa.h
 create mode 100644 bat/analyze.c
 create mode 100644 bat/analyze.h
 create mode 100644 bat/bat.c
 create mode 100644 bat/common.c
 create mode 100644 bat/common.h
 create mode 100644 bat/convert.c
 create mode 100644 bat/convert.h
 create mode 100644 bat/signal.c
 create mode 100644 bat/signal.h
Signature · 1 line
1.9.1