Skip to content

RFC mtd: spi-nor: improve support of QSPI nor

Cyrille Pitchen linux-arm-kernel linux-devicetree linux-mtd linux-spi lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v7 RFC Latest6 patches 2 repliesIn review

Patches in v7 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6mtd: spi-nor: remove unused read_xfer/write_xfer hooksinclude/linux/mtd/spi-nor.h+0 -350 replies
2/6mtd: spi-nor: read JEDEC ID with multiple I/O protocolsdrivers/mtd/devices/m25p80.c drivers/mtd/spi-nor/fsl-quadspi.c drivers/mtd/spi-nor/nxp-spifi.c +2 more+81 -282 replies
3/6mtd: spi-nor: set the read op code and protocol based on the manufacturerdrivers/mtd/spi-nor/spi-nor.c include/linux/mtd/spi-nor.h+481 -730 replies
4/6mtd: m25p80: add support of dual and quad spi protocols to all commandsdrivers/mtd/devices/m25p80.c+212 -420 replies
5/6Documentation: atmel-quadspi: add binding file for Atmel QSPI driverDocumentation/devicetree/bindings/mtd/atmel-quadspi.txt+29 -00 replies
6/6mtd: atmel-quadspi: add driver for Atmel QSPI controllerdrivers/mtd/spi-nor/Kconfig drivers/mtd/spi-nor/Makefile drivers/mtd/spi-nor/atmel-quadspi.c+888 -00 replies

Reviews trailers per patch

1 of 6 patches has a Reviewed-by or Acked-by.

PatchNicolas FerreMarek VasutRob Herring
1/6
2/6
3/6
4/6
5/6A-b A-b A-b
6/6

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v7 thread

Cover letter [linux-next RFC v7 0/6] mtd: spi-nor: improve support of QSPI nor

Hi all,

this series is still a work in progress though it is almost finished. The support of Macronix dummy code to configure the number of dummy cycles is still missing...

However I would like some feedbacks to synchronize this work with other mtd / spi-nor improvements as I see lots of patches on the mailing list.

Best Regards,

Cyrille

Cyrille Pitchen (6):
mtd: spi-nor: remove unused read_xfer/write_xfer hooks
mtd: spi-nor: read JEDEC ID with multiple I/O protocols
mtd: spi-nor: set the read op code and protocol based on the
manufacturer
mtd: m25p80: add support of dual and quad spi protocols to all
commands
Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
mtd: atmel-quadspi: add driver for Atmel QSPI controller

 .../devicetree/bindings/mtd/atmel-quadspi.txt      |  29 +
 drivers/mtd/devices/m25p80.c                       | 262 ++++--
 drivers/mtd/spi-nor/Kconfig                        |   7 +
 drivers/mtd/spi-nor/Makefile                       |   1 +
 drivers/mtd/spi-nor/atmel-quadspi.c                | 880 +++++++++++++++++++++
 drivers/mtd/spi-nor/fsl-quadspi.c                  |   2 +-
 drivers/mtd/spi-nor/nxp-spifi.c                    |  13 +-
 drivers/mtd/spi-nor/spi-nor.c                      | 603 ++++++++++++--
 include/linux/mtd/spi-nor.h                        |  68 +-
 9 files changed, 1689 insertions(+), 176 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
 create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c
Signature · 1 line
1.8.2.2