Support for max44000 Ambient and Infrared Proximity Sensor
Status from this message: Applied.
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest5 patches 5 repliesApplied
- v25 patches 5 repliesSuperseded
- v15 patches 18 repliesSuperseded
Changes in v3 from the cover letter
* Drop reg_defaults from regmap_config
* Use REGCACHE_RBTREE
* Implement readable/writable/volatile reg with switches
* Use test_bit when checking the scan mask
* Add _INT_TIME info_mask in patch 4 rather than 2
* Cleaner spacing in max44000_remove
Patches in v3 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/5 | max44000: Initial supportdrivers/ drivers/ drivers/ | +336 | 1 reply | |
| 2/5 | max44000: Initial support for proximity readingdrivers/ | +43 | 1 reply | |
| 3/5 | max44000: Support controlling LED current outputdrivers/ | +53 | 1 reply | |
| 4/5 | max44000: Expose ambient sensor scalingdrivers/ | +162 | 1 reply | |
| 5/5 | max44000: Initial triggered buffer supportdrivers/ | +62 | 1 reply |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [PATCH v3 0/5] Support for max44000 Ambient and Infrared Proximity Sensor
Changes since v2:
* Drop reg_defaults from regmap_config
* Use REGCACHE_RBTREE
* Implement readable/writable/volatile reg with switches
* Use test_bit when checking the scan mask
* Add _INT_TIME info_mask in patch 4 rather than 2
* Cleaner spacing in max44000_remove
Changes since v1:
* Remove max44000_data.client
* Maintain alphabetical order in kconfig/makefile
* Avoid pointless inlines
* Remove explicit CONFIG_OF because no special handling is done
* Set storagebits = 16 for proximity channel and avoid VLAs
* Expand MAX44000_REGMASK for readability/reviewability
* Clear irq bits at the end of the probe function
* Only write important bits on probe rather than everything
Crestez Dan Leonard (5):
max44000: Initial support
max44000: Initial support for proximity reading
max44000: Support controlling LED current output
max44000: Expose ambient sensor scaling
max44000: Initial triggered buffer support
drivers/iio/light/Kconfig | 11 + drivers/iio/light/Makefile | 1 + drivers/iio/light/max44000.c | 637 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 649 insertions(+) create mode 100644 drivers/iio/light/max44000.c
Signature · 1 line
2.5.5