clk: sunxi-ng: Add the A83T clocks
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest posting 2/20 of 3 patches 0 repliesNew
- v2 posting 1/23 patches 0 repliesSuperseded
- v1 RFC2 patches 1 replySuperseded
Patches in v2 posting 2/2 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [linux-sunxi] [PATCH v2 0/3] clk: sunxi-ng: Add the A83T clocks
Quoted 3 lines · On Mon, 22 Aug 2016 02:23:51 +0800 Vishnu Patekar…
Thanks for followup patches for a83t modern clock.
well, this patch series does not apply on sunxi/for-next.
Hi Vishnu,
This series is rather old!
Well, at this time, I was thinking that the 'modern' clock (aka sunxi-ng) was a good thing, but, just after sending this series, I was blocked, mainly because of the 'new timing' of the MMC clocks. So, I rewrote and simplified the sunxi clock driver, and I submitted a 'ccu' patch which was refused by Maxime and Mike.
Actually, my 'ccu' driver is almost finished. The code is only 1200 lines in one file. It contains optimized computation of the clock parameters, handles the H3 CPU frequency, the MMC 'new timing', sigma-delta modulation for the audio PLL, the PRCM clocks and more. The SoC specific tables (actually H3 and A83T) are about 10kB, but they are defined as templates in .init.rodata, so that only the tables of the current SoC remain in memory after system init.
This driver works fine for my Allwinner's boards and I will never go back to the 'sunxi-ng' which is rather complex and lacks of flexibility. If you are interested, the source is available in my site (see below).
Signature · 2 lines
Ken ar c'henta? | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/