Skip to content

Support dwc3 host suspend/resume

Baolin Wang lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 13 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4usb: host: xhci: Move the xhci quirks checking to the right placedrivers/usb/host/xhci-plat.c+4 -42 replies
2/4usb: host: xhci: Introduce one new 'usb3_slow_suspend' member for xhci private datadrivers/usb/host/xhci-plat.c include/linux/usb/xhci_pdriver.h+6 -06 replies
3/4usb: dwc3: core: Move the mode setting to the right placedrivers/usb/dwc3/core.c+15 -30 replies
4/4usb: dwc3: core: Support the dwc3 host suspend/resumedrivers/usb/dwc3/Kconfig drivers/usb/dwc3/core.c drivers/usb/dwc3/core.h +1 more+78 -15 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] Support dwc3 host suspend/resume

For mobile devices, they usually require very strict power management. Such as dwc3 controller, we should enter suspend mode when no cable plug in, then we can power off the dwc3 controller for saving power.

Now dwc3 gadget can support suspend/resume well, but we also want to suspend/ resume the host when slave device is detached or attached.

Baolin Wang (4):
usb: host: xhci: Move the xhci quirks checking to the right place
usb: host: xhci: Introduce one new 'usb3_slow_suspend' member for
xhci private data
usb: dwc3: core: Move the mode setting to the right place
usb: dwc3: core: Support the dwc3 host suspend/resume

 drivers/usb/dwc3/Kconfig         |    7 +++++++
 drivers/usb/dwc3/core.c          |   43 ++++++++++++++++++++++++++++++++++----
 drivers/usb/dwc3/core.h          |   15 +++++++++++++
 drivers/usb/dwc3/host.c          |   32 ++++++++++++++++++++++++++++
 drivers/usb/host/xhci-plat.c     |   11 ++++++----
 include/linux/usb/xhci_pdriver.h |    3 +++
 6 files changed, 103 insertions(+), 8 deletions(-)
Signature · 1 line
1.7.9.5