Don't use stack for DMA transers on media usb drivers

Sending URB control messages from stack was never supported. Yet, on x86, the stack was usually at a memory region that allows DMA transfer.

So, several drivers got it wrong. On Kernel 4.9, if VMAP_STACK=y, none of those drivers will work, as the stack won't be on a DMA-able area anymore.

So, fix the media drivers that requre it. It should noticed that the vast majority are at dvb-usb.

Please notice that those patches are compile-tested only. So, I really appreciate if people with devices using those drivers could test and report if they don't break anything. I intend to send this

PS.: I didn't verify any media driver inside staging.

Version 2:

- Added other USB drivers that are out of dvb-usb. After this series, all drivers will use kmalloc'ed buffers, although I won't doubt that some implementations may still have issues.

- Be sure that, on all places where it is using a buffer allocated at the dvb-usb state structs, they'll be protected by some mutex. On some such cases, there was already a mutex at the DVB core. So, I didn't need to add a new one. Thanks to Antti that reminded me about such need.

Mauro Carvalho Chehab (31):
af9005: don't do DMA on stack
cinergyT2-core: don't do DMA on stack
cinergyT2-core: handle error code on RC query
cinergyT2-fe: cache stats at cinergyt2_fe_read_status()
cinergyT2-fe: don't do DMA on stack
cxusb: don't do DMA on stack
dib0700: be sure that dib0700_ctrl_rd() users can do DMA
dib0700_core: don't use stack on I2C reads
dibusb: don't do DMA on stack
dibusb: handle error code on RC query
digitv: don't do DMA on stack
dtt200u-fe: don't keep waiting for lock at set_frontend()
dtt200u-fe: don't do DMA on stack
dtt200u-fe: handle errors on USB control messages
dtt200u: don't do DMA on stack
dtt200u: handle USB control message errors
dtv5100: don't do DMA on stack
gp8psk: don't do DMA on stack
gp8psk: don't go past the buffer size
nova-t-usb2: don't do DMA on stack
pctv452e: don't do DMA on stack
pctv452e: don't call BUG_ON() on non-fatal error
technisat-usb2: use DMA buffers for I2C transfers
dvb-usb: warn if return value for USB read/write routines is not
checked
nova-t-usb2: handle error code on RC query
dw2102: return error if su3000_power_ctrl() fails
digitv: handle error code on RC query
cpia2_usb: don't use stack for DMA
s2255drv: don't use stack for DMA
stk-webcam: don't use stack for DMA
flexcop-usb: don't use stack for DMA

 drivers/media/usb/b2c2/flexcop-usb.c        | 105 +++++----
 drivers/media/usb/b2c2/flexcop-usb.h        |   4 +
 drivers/media/usb/cpia2/cpia2_usb.c         |  32 ++-
 drivers/media/usb/dvb-usb/af9005.c          | 317 ++++++++++++++++------------
 drivers/media/usb/dvb-usb/cinergyT2-core.c  |  90 +++++---
 drivers/media/usb/dvb-usb/cinergyT2-fe.c    | 100 ++++-----
 drivers/media/usb/dvb-usb/cxusb.c           |  62 +++---
 drivers/media/usb/dvb-usb/cxusb.h           |   6 +
 drivers/media/usb/dvb-usb/dib0700_core.c    |  31 ++-
 drivers/media/usb/dvb-usb/dib0700_devices.c |  25 +--
 drivers/media/usb/dvb-usb/dibusb-common.c   | 113 +++++++---
 drivers/media/usb/dvb-usb/dibusb.h          |   3 +
 drivers/media/usb/dvb-usb/digitv.c          |  26 ++-
 drivers/media/usb/dvb-usb/digitv.h          |   3 +
 drivers/media/usb/dvb-usb/dtt200u-fe.c      | 128 +++++++----
 drivers/media/usb/dvb-usb/dtt200u.c         | 120 ++++++++---
 drivers/media/usb/dvb-usb/dtv5100.c         |  10 +-
 drivers/media/usb/dvb-usb/dvb-usb.h         |   6 +-
 drivers/media/usb/dvb-usb/dw2102.c          |   2 +-
 drivers/media/usb/dvb-usb/gp8psk.c          |  25 ++-
 drivers/media/usb/dvb-usb/nova-t-usb2.c     |  25 ++-
 drivers/media/usb/dvb-usb/pctv452e.c        | 136 +++++++-----
 drivers/media/usb/dvb-usb/technisat-usb2.c  |  16 +-
 drivers/media/usb/s2255/s2255drv.c          |  15 +-
 drivers/media/usb/stkwebcam/stk-webcam.c    |  16 +-
 25 files changed, 918 insertions(+), 498 deletions(-)

2.7.4