Skip to content

sunxi: Gigabit PHY support for SUN8I_EMAC

Philipp Tomsich u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2sun8i: define CONFIG_PHY_GIGE for EMACinclude/configs/sunxi-common.h+4 -02 replies
1/2sun8i: define CONFIG_PHY_GIGE for EMAC+0 -01 reply
1/2sun8i: define CONFIG_PHY_GIGE for EMAC+0 -00 replies
2/2sun8i: enable support for the Micrel KSZ9031 with SUN8I_EMACinclude/configs/sunxi-common.h+2 -01 reply
2/2sun8i: enable support for the Micrel KSZ9031 with SUN8I_EMAC+0 -00 replies
2/2sun8i: enable support for the Micrel KSZ9031 with SUN8I_EMAC+0 -01 reply
2/2sun8i: enable support for the Micrel KSZ9031 with SUN8I_EMAC+0 -00 replies

Reviews trailers per patch

3 of 7 patches have a Reviewed-by or Acked-by.

PatchChen-Yu Tsai
1/2R-b
1/2R-b
1/2R-b
2/2
2/2
2/2
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH v1 0/2] sunxi: Gigabit PHY support for SUN8I_EMAC

The sun8i_emac is a triple-speed Ethernet controller. This changeset adds support for negotiating links at gigabit speeds:
* enables CONFIG_PHY_GIGE
* enables support for the Micrel KSZ9031 GbE PHY

Separated out into two changes, as CONFIG_PHY_GIGE is needed with any GbE PHY for gigabit-operation. Bundled into a single changeset, as we test this with the KSZ9031 on our boards.

Klaus Goger (1):
sun8i: define CONFIG_PHY_GIGE for EMAC

Philipp Tomsich (1):
sun8i: enable support for the Micrel KSZ9031 with SUN8I_EMAC

 include/configs/sunxi-common.h | 6 ++++++
 1 file changed, 6 insertions(+)
Signature · 1 line
1.9.1