Skip to content

Add support for MediaTek AHCI SATA

Ryder Lee linux-devicetree linux-ide linux-mediatek lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2ata: mediatek: add support for MediaTek SATA controllerdrivers/ata/Kconfig drivers/ata/Makefile drivers/ata/ahci_mtk.c+207 -00 replies
2/2dt-bindings: ata: add DT bindings for MediaTek SATA controllerDocumentation/devicetree/bindings/ata/ahci-mtk.txt+48 -02 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Add support for MediaTek AHCI SATA

Hi,

This patch series add support for AHCI compatible SATA controller, and it is compliant with the ahci 1.3 and sata 3.0 specification. This driver is slightly different than ahci_platform.c (eg. reset control, subsystem setting).

Ryder Lee (2):
ata: mediatek: add support for MediaTek SATA controller
dt-bindings: ata: add DT bindings for MediaTek SATA controller

 Documentation/devicetree/bindings/ata/ahci-mtk.txt |  48 +++++
 drivers/ata/Kconfig                                |  10 ++
 drivers/ata/Makefile                               |   1 +
 drivers/ata/ahci_mtk.c                             | 196 +++++++++++++++++++++
 4 files changed, 255 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt
 create mode 100644 drivers/ata/ahci_mtk.c
Signature · 1 line
1.9.1

Read the cover letter in its thread