tc358743: Support for a wider range of inputs
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest3 patches 14 repliesIn review
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | tc358743: Correct clock mode reported in g_mbus_configdrivers/ | +3 | 1 reply | |
| 2/3 | tc358743: Increase FIFO level to 300.drivers/ | +8 | 13 replies | |
| 3/3 | tc358743: Add support for 972Mbit/s link freq.drivers/ | +33 | 0 replies |
Reviews trailers per patch
1 of 3 patches has a Reviewed-by or Acked-by.
| Patch | Philipp Zabel |
|---|---|
| 1/3 | A-b |
| 2/3 | |
| 3/3 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/3] [media] tc358743: Support for a wider range of inputs
Three minor changes to the TC358743 HDMI to CSI2 bridge chip driver.
- Correct the clock mode reported via g_mbus_config to match that set.
- Increase the FIFO level to allow resolutions lower than 720P60 to work.
- Add settings for a new link frequency of 972Mbit/s. This allows 1080P50 UYVY to work on two lanes (useful on the Raspberry Pi which only brings out two CSI2 lanes to the camera connector).
I'd like to extend the last one to dynamically calculate all the values for an arbitrary link speed, but time hasn't allowed as yet.
Dave Stevenson (3):
[media] tc358743: Correct clock mode reported in g_mbus_config [media] tc358743: Increase FIFO level to 300. [media] tc358743: Add support for 972Mbit/s link freq.
drivers/media/i2c/tc358743.c | 62 +++++++++++++++++++++++++++++++------------- 1 file changed, 44 insertions(+), 18 deletions(-)
Signature · 1 line
2.7.4