Skip to content

usb: dwc3: Add new updates for DWC_usb31

Thinh Nguyen linux-devicetree linux-usb 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest2 of 15 patches 1 replyIn review
  2. v32 of 15 patches 2 repliesSuperseded
  3. v22 of 14 patches 0 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v12 of 15 patches5 repliesSuperseded

Changes in v4 from the cover letter

- Correctly refer "databook" as "programming guide"
- Document more detail about enabling of ESS periodic tx/rx threshold

2 of 15 patches are in this archive. The cover letter announces 15.

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
8/15usb: dwc3: Make TX/RX threshold configurableDocumentation/devicetree/bindings/usb/dwc3.txt+16 -01 reply
12/15usb: dwc3: Add disabling of start_transfer failure quirkDocumentation/devicetree/bindings/usb/dwc3.txt+3 -00 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchRob Herring
8/15R-b
12/15

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 00/15] usb: dwc3: Add new updates for DWC_usb31

This patch series adds new updates and some fixes for DWC_usb31.

Changes in v4:
- Correctly refer "databook" as "programming guide"
- Document more detail about enabling of ESS periodic tx/rx threshold

Changes in v3:
- Add "usb: dwc3: Check controller type before setting speed" to series

Changes in v2:
- Add another patch to the series to increase mass_storage max_speed
- Separate "usb: dwc3: ep0: Reset TRB counter for ep0 IN" from series
- Separate "usb: dwc3: gadget: Set maxpacket size for ep0 IN" from series
- Use msleep() instead of mdelay() for SoftReset PHY sync delay
- Rename new USB31 macros from DWC3_USB31_* to DWC31_*
- Rename device properties and replace '_' with '-'
- Minor fixes in the commit messages

Thinh Nguyen (15):
usb: dwc3: Add SoftReset PHY synchonization delay
usb: core: urb: Check SSP isoc ep comp descriptor
usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
usb: dwc3: Check IP revision for GTXFIFOSIZ
usb: dwc3: Add DWC_usb31 GRXTHRCFG bit fields
usb: dwc3: gadget: Check IP revision for GRXTHRCFG
usb: dwc3: Add DWC_usb31 GTXTHRCFG reg fields
usb: dwc3: Make TX/RX threshold configurable
usb: dwc3: Check for ESS TX/RX threshold config
usb: dwc3: Dump LSP and BMU debug info
usb: dwc3: Track DWC_usb31 VERSIONTYPE
usb: dwc3: Add disabling of start_transfer failure quirk
usb: dwc3: Add workaround for isoc start transfer failure
usb: dwc3: Check controller type before setting speed
usb: gadget: mass_storage: Set max_speed to SSP

 Documentation/devicetree/bindings/usb/dwc3.txt |  19 +++
 drivers/usb/core/urb.c                         |   8 +
 drivers/usb/dwc3/core.c                        |  72 ++++++++-
 drivers/usb/dwc3/core.h                        |  53 +++++++
 drivers/usb/dwc3/debugfs.c                     |   5 +
 drivers/usb/dwc3/gadget.c                      | 205 ++++++++++++++++++++++++-
 drivers/usb/gadget/legacy/mass_storage.c       |   2 +-
 7 files changed, 354 insertions(+), 10 deletions(-)
Signature · 6 lines
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html