mx6cuboxi: Add support for SOMs with eMMC
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest6 patches 0 repliesNew
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/6 | mmc: drop mention of IN_PROGRESS statusinclude/ | +1 | 0 replies | |
| 2/6 | mmc: break out get_op_cond code to its own functiondrivers/ include/ | +45 | 1 reply | |
| 3/6 | mx6cuboxi: Add support for eMMC bootingboard/ | +94 | 0 replies | |
| 4/6 | mx6cuboxi: drop CONFIG_SYS_FSL_USDHC_NUMinclude/ | +0 | 0 replies | |
| 5/6 | mx6cuboxi: Use mmc_get_op_cond() to check for an eMMCboard/ | +14 | 0 replies | |
| 6/6 | mx6cuboxi: Add emmc device tree suffixinclude/ | +14 | 0 replies |
Reviews trailers per patch
1 of 6 patches has a Reviewed-by or Acked-by.
| Patch | Stefano Babic |
|---|---|
| 1/6 | |
| 2/6 | R-b |
| 3/6 | |
| 4/6 | |
| 5/6 | |
| 6/6 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [U-Boot] [PATCH 0/6] mx6cuboxi: Add support for SOMs with eMMC
The newer rev 1.5 of the SolidRun i.MX6 SOM can optionally come with eMMC on the SOM. This series adds support for the eMMC device on these SOMs.
Since eMMC has card detect signal this series uses the new mmc_get_op_cond() function that is broken out of mmc_init_start(). Successful completion of mmc_get_op_cond() indicates that the eMMC is present.
Finally, the last patch in this series constructs the name of the kernel device tree to load. This name is compatible with recent mainline kernels.
This series depends on the patches adding support for SOM rev 1.5 that were posted earlier:
https://patchwork.ozlabs.org/patch/926302/
https://patchwork.ozlabs.org/patch/926301/
Baruch Siach (2):
mmc: drop mention of IN_PROGRESS status
mx6cuboxi: drop CONFIG_SYS_FSL_USDHC_NUM
Jon Nettleton (4):
mmc: break out get_op_cond code to its own function
mx6cuboxi: Add support for eMMC booting
mx6cuboxi: Use mmc_get_op_cond() to check for an eMMC
mx6cuboxi: Add emmc device tree suffix
board/solidrun/mx6cuboxi/mx6cuboxi.c | 115 +++++++++++++++++++++++++-- drivers/mmc/mmc.c | 61 ++++++++------ include/configs/mx6cuboxi.h | 25 +++--- include/mmc.h | 12 ++- 4 files changed, 167 insertions(+), 46 deletions(-)
Signature · 1 line
2.17.1