Skip to content

Enable accelerated OpenGL in qemu

Alexander Kanavin openembedded-core 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest20 patches 0 repliesNew

V4 changes from the cover letter

- address failures uncovered by yocto autobuilder

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/20gtk+3: enable native/nativesdk variantmeta/recipes-gnome/gtk+/gtk+3.inc+23 -20 replies
2/20gtk+3: remove the gtk-icon-utils-native recipemeta/recipes-gnome/gtk+/gtk+3.inc meta/recipes-gnome/gtk+/gtk-icon-utils-native_3.22.30.bb meta/recipes-gnome/gtk+/gtk-icon-utils/Remove-Gdk-dependency-from-gtk-encode-symbolic-svg.patch+5 -1670 replies
3/20mesa: enable native and nativesdk variantsmeta/recipes-graphics/mesa/mesa.inc+13 -70 replies
4/20default-providers: set mesa as default provider for nativesdk-mesameta/conf/distro/include/default-providers.inc+2 -00 replies
5/20virglrenderer: add a recipemeta/conf/distro/include/maintainers.inc meta/recipes-graphics/virglrenderer/virglrenderer/0001-vtest-add-missing-includes.patch meta/recipes-graphics/virglrenderer/virglrenderer_git.bb+58 -00 replies
6/20qemu: enable virglrenderer and glx options for native/nativesdk buildsmeta/recipes-devtools/qemu/qemu.inc+5 -50 replies
7/20qemu: drop --with-gtkabi option, as it is no longer supportedmeta/recipes-devtools/qemu/qemu.inc+1 -10 replies
8/20local.conf.sample: adjust the qemu config to enable gtk+ instead of sdlmeta-poky/conf/local.conf.sample+3 -60 replies
9/20qemu: build target variant with gtk+, and nativesdk variant without sdlmeta/recipes-devtools/qemu/qemu.inc+2 -20 replies
10/20qemu: remove support for building against host sdlmeta/recipes-devtools/qemu/qemu.inc+0 -80 replies
11/20atk: disable gobject-introspection for nativesdkmeta/recipes-support/atk/atk_2.30.0.bb+2 -00 replies
12/20qemu: add a gettext-native dependency to gtk optionmeta/recipes-devtools/qemu/qemu.inc+1 -10 replies
13/20libjpeg-turbo: fix nativesdk build in same way as native builds aremeta/recipes-graphics/jpeg/libjpeg-turbo_2.0.1.bb+1 -00 replies
14/20qemu: add a patch to avoid a missing definition errormeta/recipes-devtools/qemu/qemu/0001-Add-a-missing-X11-include.patch meta/recipes-devtools/qemu/qemu/0012-fix-libcap-header-issue-on-some-distro.patch meta/recipes-devtools/qemu/qemu/0013-cpus.c-Add-error-messages-when-qemi_cpu_kick_thread-.patch +1 more+68 -20 replies
15/20qemu: add environment variable wrappers to make qemu look good with gtk frontendmeta/recipes-devtools/qemu/qemu.inc+19 -00 replies
16/20qemu: add a backported patch to fix egl-headless supportmeta/recipes-devtools/qemu/qemu/0001-egl-headless-add-egl_create_context.patch meta/recipes-devtools/qemu/qemu_3.1.0.bb+51 -00 replies
17/20runqemu: add options for enabling virgl GL accelerationscripts/runqemu+23 -00 replies
18/20runqemu: do not check for GL librariesscripts/runqemu+0 -350 replies
19/20selftest: add tests for virgl GL accelerationmeta-selftest/lib/oeqa/runtime/cases/virgl.py meta/lib/oeqa/selftest/cases/runtime_test.py+78 -00 replies
20/20vte: allow building vte-native with gcc 4.8meta/recipes-support/vte/vte/0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch meta/recipes-support/vte/vte_0.52.2.bb+30 -20 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 00/20] Enable accelerated OpenGL in qemu

V2 changes: addressed feedback from the first review round V3 changes:
- better fix for missing qemu X11 include, as discussed with upstream
- maintainers.inc entry for virglrenderer
- egl-headless support (see below for details)
- improvements to kmscube recipe
- fix to vte-native to allow building it with gcc 4.8
V4 changes
- address failures uncovered by yocto autobuilder
V5 changes
- remove patches that have been merged to master
- replace BBCLASSEXTEND_remove with PREFERRED_PROVIDER for mesa recipe variants

Why this? Why now?

1. I think we are heading towards a reality where some kind of working GL is a 'must' for any kind of UI work.
2. Typically people build images and then transfer them to the NUC or even target boards for testing - using qemu would be less awkward.
3. Current qemu configuration is basically useless here, as it only provides a very slow software GL driver from mesa.

0. TLDR:

a) Gtk UI frontend

$ . oe-init-build-env build-virgl
$ bitbake core-image-sato-sdk
$ runqemu kvm gl
$$ run glxgears or any other GL-capable binary inside qemu

b) egl-headless

$ . oe-init-build-env build-virgl
$ bitbake core-image-sato-sdk
$ runqemu kvm egl-headless publicvnc
$ <connect with a vnc viewer to 127.0.0.1:5900>
$$ run glxgears or any other GL-capable binary inside qemu

1. For the local UI, qemu is switched over to use gtk frontend. I simply couldn't get SDL frontend to work properly, it only displays a blank black window or doesn't start at all. Same thing happens with qemu binaries provided by Fedora and opensuse (Ubuntu's qemu lacks virgl support). Seems like SDL support has regressed.

2. What is egl-headless?

In this variant, Qemu does not open a UI window at all. Instead, it renders all graphics, including GL, into a memory buffer, which can be seen with a vnc or spice client (over a TCP socket). This has the following advantages:

- no need to be physically present at the host machine, output (including GL bits!) can be seen remotely
- no need for the host machine to run an X session

3. While the components are built against the most minimum necessary mesa-native set (gbm, egl, dri with no drivers), libepoxy loads and uses the host GL implementation (through a chrpath hack). This is both to save build times, and because the host is likely to have a set of drivers more appropriate for the physical machine (e.g. proprietary nvidia stack, although I didn't test that).

4. I tested this with
- glamor X server
- weston compositor with drm backend (build core-image-weston, then edit weston.ini in the image to use drm backed instead of fbdev).
- kmscube
- glxgears
- https://www.geeks3d.com/gputest/

The latter two show FPS that is similar to running them directly on the host.

5. Some things I am not sure about:

- how much of a 'default' should this be for running qemu. It works for me,
but other people might find it less stable compared to the existing sdl-vmware-swrast setup.

- what other tests and demos could be run

- how could this be tested on the autobuilder. I wrote two oe-selftests for this (gtk, egl-headless), but one of them does require an X session, and both require ability to create opengl contexts on the host.

The following changes since commit a7774aced031de1c8e42d0559182e802df8bcaa8:

bitbake: gitsm: The fetcher did not process some recursive submodules properly. (2019-01-28 23:14:27 +0000)

are available in the Git repository at:

git://git.yoctoproject.org/poky-contrib akanavin/virgl-gtk
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=akanavin/virgl-gtk

Alexander Kanavin (20):
gtk+3: enable native/nativesdk variant
gtk+3: remove the gtk-icon-utils-native recipe
mesa: enable native and nativesdk variants
default-providers: set mesa as default provider for nativesdk-mesa
virglrenderer: add a recipe
qemu: enable virglrenderer and glx options for native/nativesdk builds
qemu: drop --with-gtkabi option, as it is no longer supported local.conf.sample: adjust the qemu config to enable gtk+ instead of
sdl
qemu: build target variant with gtk+, and nativesdk variant without
sdl
qemu: remove support for building against host sdl
atk: disable gobject-introspection for nativesdk
qemu: add a gettext-native dependency to gtk option
libjpeg-turbo: fix nativesdk build in same way as native builds are
qemu: add a patch to avoid a missing definition error
qemu: add environment variable wrappers to make qemu look good with
gtk frontend
qemu: add a backported patch to fix egl-headless support
runqemu: add options for enabling virgl GL acceleration
runqemu: do not check for GL libraries
selftest: add tests for virgl GL acceleration
vte: allow building vte-native with gcc 4.8

 meta-poky/conf/local.conf.sample              |   9 +-
 meta-selftest/lib/oeqa/runtime/cases/virgl.py |  28 +++++
 .../conf/distro/include/default-providers.inc |   2 +
 meta/conf/distro/include/maintainers.inc      |   1 +
 meta/lib/oeqa/selftest/cases/runtime_test.py  |  50 +++++++++
 meta/recipes-devtools/qemu/qemu.inc           |  41 ++++---
 .../qemu/0001-Add-a-missing-X11-include.patch |  65 +++++++++++
 ...-egl-headless-add-egl_create_context.patch |  50 +++++++++
 ...x-libcap-header-issue-on-some-distro.patch |   2 +-
 ...-messages-when-qemi_cpu_kick_thread-.patch |   2 +-
 meta/recipes-devtools/qemu/qemu_3.1.0.bb      |   2 +
 meta/recipes-gnome/gtk+/gtk+3.inc             |  28 ++++-
 .../gtk+/gtk-icon-utils-native_3.22.30.bb     |  63 -----------
 ...endency-from-gtk-encode-symbolic-svg.patch | 102 ------------------
 .../jpeg/libjpeg-turbo_2.0.1.bb               |   1 +
 meta/recipes-graphics/mesa/mesa.inc           |  20 ++--
 .../0001-vtest-add-missing-includes.patch     |  38 +++++++
 .../virglrenderer/virglrenderer_git.bb        |  19 ++++
 meta/recipes-support/atk/atk_2.30.0.bb        |   2 +
 ...chool-asignment-to-avoid-gcc-4.8-err.patch |  27 +++++
 meta/recipes-support/vte/vte_0.52.2.bb        |   5 +-
 scripts/runqemu                               |  58 ++++------
 22 files changed, 381 insertions(+), 234 deletions(-)
 create mode 100644 meta-selftest/lib/oeqa/runtime/cases/virgl.py
 create mode 100644 meta/recipes-devtools/qemu/qemu/0001-Add-a-missing-X11-include.patch
 create mode 100644 meta/recipes-devtools/qemu/qemu/0001-egl-headless-add-egl_create_context.patch
 delete mode 100644 meta/recipes-gnome/gtk+/gtk-icon-utils-native_3.22.30.bb
 delete mode 100644 meta/recipes-gnome/gtk+/gtk-icon-utils/Remove-Gdk-dependency-from-gtk-encode-symbolic-svg.patch
 create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer/0001-vtest-add-missing-includes.patch
 create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer_git.bb
 create mode 100644 meta/recipes-support/vte/vte/0001-app.cc-use-old-school-asignment-to-avoid-gcc-4.8-err.patch
Signature · 1 line
2.17.1