Skip to content

board: ge: initial dm support

Ian Ray u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest13 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/13board: ge: bx50v3: Enable CONFIG_DMarch/arm/dts/Makefile arch/arm/dts/imx6q-bx50v3.dts configs/ge_bx50v3_defconfig+21 -01 reply
2/13board: ge: bx50v3: Enable CONFIG_DM_MMCarch/arm/dts/imx6q-bx50v3.dts board/ge/bx50v3/bx50v3.c configs/ge_bx50v3_defconfig +1 more+52 -1181 reply
3/13board: ge: bx50v3: Enable CONFIG_DM_GPIOboard/ge/bx50v3/bx50v3.c configs/ge_bx50v3_defconfig+11 -11 reply
4/13board: ge: bx50v3: Enable CONFIG_DM_SPI, CONFIG_DM_SPI_FLASHarch/arm/dts/imx6q-bx50v3.dts board/ge/bx50v3/bx50v3.c configs/ge_bx50v3_defconfig+29 -251 reply
5/13board: ge: ppd: Enable CONFIG_DMarch/arm/dts/Makefile arch/arm/dts/imx53-ppd.dts configs/mx53ppd_defconfig+19 -01 reply
6/13arm: imx: Add esdhc3/4 nodes to imx53.dtsiarch/arm/dts/imx53.dtsi+26 -01 reply
7/13board: ge: ppd: Enable CONFIG_DM_MMCarch/arm/dts/imx53-ppd.dts board/ge/mx53ppd/mx53ppd.c configs/mx53ppd_defconfig +1 more+34 -781 reply
8/13board: ge: store version information in fdtboard/ge/bx50v3/bx50v3.c board/ge/mx53ppd/mx53ppd.c configs/ge_bx50v3_defconfig +1 more+24 -01 reply
9/13board: ge: bx50v3: Specific ARP timeout removedinclude/configs/ge_bx50v3.h+0 -11 reply
10/13board: ge: bx50v3: Network booting of fitImage with nfs rootfsinclude/configs/ge_bx50v3.h+28 -11 reply
11/13mx53ppd: bring dock out of reset at bootboard/ge/mx53ppd/ppd_gpio.h+4 -01 reply
12/13mx53ppd: fix unsupported set commandinclude/configs/mx53ppd.h+3 -31 reply
13/13bootcount: i2c: Delay after writingdrivers/bootcount/bootcount_i2c.c+4 -04 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 00/13] board: ge: initial dm support

This series is primarily (patches 01-07) about converting ge_bx50v3 and mx53ppd boards to use the Driver Model and Device Tree.

Four additional patches (08-13) include recent additional functionality and fixes.

Patches applicable on top of master:

* SHA1: 535d74a8ae8d194269cefdf59ae17a92cd6e75dc

* However, note that patch _13_ requires:
- https://patchwork.ozlabs.org/patch/947075/
- https://patchwork.ozlabs.org/patch/947076/
- https://patchwork.ozlabs.org/patch/947074/

Ian Ray (11):
board: ge: bx50v3: Enable CONFIG_DM
board: ge: bx50v3: Enable CONFIG_DM_MMC
board: ge: bx50v3: Enable CONFIG_DM_GPIO
board: ge: bx50v3: Enable CONFIG_DM_SPI, CONFIG_DM_SPI_FLASH
board: ge: ppd: Enable CONFIG_DM
arm: imx: Add esdhc3/4 nodes to imx53.dtsi
board: ge: ppd: Enable CONFIG_DM_MMC
board: ge: store version information in fdt
mx53ppd: bring dock out of reset at boot
mx53ppd: fix unsupported set command
bootcount: i2c: Delay after writing

Joonas Aijala (2):
board: ge: bx50v3: Specific ARP timeout removed
board: ge: bx50v3: Network booting of fitImage with nfs rootfs

 arch/arm/dts/Makefile             |   3 +
 arch/arm/dts/imx53-ppd.dts        |  43 ++++++++++
 arch/arm/dts/imx53.dtsi           |  26 +++++++
 arch/arm/dts/imx6q-bx50v3.dts     |  89 +++++++++++++++++++++
 board/ge/bx50v3/bx50v3.c          | 160 +++++---------------------------------
 board/ge/mx53ppd/mx53ppd.c        |  84 +++-----------------
 board/ge/mx53ppd/ppd_gpio.h       |   4 +
 configs/ge_bx50v3_defconfig       |  12 +++
 configs/mx53ppd_defconfig         |   9 +++
 drivers/bootcount/bootcount_i2c.c |   4 +
 include/configs/ge_bx50v3.h       |  36 +++++++--
 include/configs/mx53ppd.h         |  12 +--
 12 files changed, 255 insertions(+), 227 deletions(-)
 create mode 100644 arch/arm/dts/imx53-ppd.dts
 create mode 100644 arch/arm/dts/imx6q-bx50v3.dts
Signature · 1 line
2.10.1