Skip to content

Add DesignWare IP support to simple reset

Gustavo Pimentel linux-devicetree lkml 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2reset: Add DesignWare IP support to simple resetdrivers/reset/Kconfig drivers/reset/reset-simple.c+4 -10 replies
2/2dt-bindings: Document the DesignWare IP reset bindingsDocumentation/devicetree/bindings/reset/snps,dw-reset.txt+30 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Add DesignWare IP support to simple reset

This patch series adds a reset-simple compatible string for DesignWare IPs allowing active high and low resets inputs.

Also adds the corresponding documentation.

Gustavo Pimentel (2):
reset: Add DesignWare IP support to simple reset
dt-bindings: Document the DesignWare IP reset bindings

 .../devicetree/bindings/reset/snps,dw-reset.txt    | 30 ++++++++++++++++++++++
 drivers/reset/Kconfig                              |  2 +-
 drivers/reset/reset-simple.c                       |  3 +++
 3 files changed, 34 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/reset/snps,dw-reset.txt
Signature · 1 line
2.7.4