Skip to content

arm: mvebu: clearfog: support boot from SATA disk

Baruch Siach u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest9 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/9spl: sata: add default partition and image namecommon/spl/spl_sata.c+8 -00 replies
2/9spl: sata: fix build with DM_SCSIcommon/spl/spl_sata.c+3 -10 replies
3/9spl: sata: don't force FS_FAT supportcommon/spl/spl_sata.c+6 -20 replies
4/9spl: sata: support U-Boot load from raw sata diskcommon/spl/Kconfig common/spl/spl_sata.c+43 -01 reply
5/9arm: mvebu: fix ahci mbus config in SPLarch/arm/mach-mvebu/cpu.c+4 -01 reply
6/9arm: mvebu: add support for boot from SATAarch/arm/mach-mvebu/Kconfig arch/arm/mach-mvebu/Makefile arch/arm/mach-mvebu/include/mach/soc.h +1 more+15 -01 reply
7/9arm: mvebu: clearfog: enable SATA in SPLarch/arm/dts/armada-388-clearfog-u-boot.dtsi+8 -01 reply
8/9arm: mvebu: clearfog: set U-Boot offset for SATA bootinclude/configs/clearfog.h+1 -11 reply
9/9arm: mvebu: clearfog: document boot from SATAboard/solidrun/clearfog/README+6 -01 reply

Reviews trailers per patch

5 of 9 patches have a Reviewed-by or Acked-by.

PatchChris Packham
1/9
2/9
3/9
4/9
5/9R-b
6/9R-b
7/9R-b
8/9R-b
9/9R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/9] arm: mvebu: clearfog: support boot from SATA disk

This series enables support for boot from SATA on the SolidRun Clearfog platform.

Patches 1-3 are preparations for the addition of loading U-Boot main image from raw SATA device. They make spl sata code independent of board macros and specific kconfig symbols.

Patch 4 adds to SPL generic support for loading U-Boot from a raw SATA device. This code is modeled after the similar support for MMC devices.

Patches 5-6 are mvebu specific. Patch 5 fixes SATA access from SPL. Patch 6 adds the SATA boot option at the SoC level.

Patches 7-9 are the board specific update that enable SATA boot in Clearfog, and document the offset setting requirement.

Baruch Siach (9):
spl: sata: add default partition and image name
spl: sata: fix build with DM_SCSI
spl: sata: don't force FS_FAT support
spl: sata: support U-Boot load from raw sata disk
arm: mvebu: fix ahci mbus config in SPL
arm: mvebu: add support for boot from SATA
arm: mvebu: clearfog: enable SATA in SPL
arm: mvebu: clearfog: set U-Boot offset for SATA boot
arm: mvebu: clearfog: document boot from SATA

 arch/arm/dts/armada-388-clearfog-u-boot.dtsi |  8 ++++
 arch/arm/mach-mvebu/Kconfig                  |  5 ++
 arch/arm/mach-mvebu/Makefile                 |  3 ++
 arch/arm/mach-mvebu/cpu.c                    |  4 ++
 arch/arm/mach-mvebu/include/mach/soc.h       |  2 +
 arch/arm/mach-mvebu/spl.c                    |  5 ++
 board/solidrun/clearfog/README               |  6 +++
 common/spl/Kconfig                           | 14 ++++++
 common/spl/spl_sata.c                        | 49 ++++++++++++++++++--
 include/configs/clearfog.h                   |  2 +-
 10 files changed, 94 insertions(+), 4 deletions(-)
Signature · 1 line
2.20.1