Skip to content

iio: adc: ina2xx: Improve device identification

Michal Simek linux-devicetree linux-hwmon linux-iio lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 9 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4iio: adc: ina2xx: Define *device_node only oncedrivers/iio/adc/ina2xx-adc.c+4 -31 reply
2/4iio: adc: ina2xx: Setup better name then simple ina2xxdrivers/iio/adc/ina2xx-adc.c+7 -12 replies
3/4dt-bindings: Add optional label property for ina2xxDocumentation/devicetree/bindings/hwmon/ina2xx.txt+2 -01 reply
4/4iio: adc: ina2xx: Use label proper for device identificationdrivers/iio/adc/ina2xx-adc.c+1 -15 replies

Reviews trailers per patch

1 of 4 patches has a Reviewed-by or Acked-by.

PatchRob Herring
1/4
2/4
3/4R-b
4/4

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/4] iio: adc: ina2xx: Improve device identification

Hi,

the purpose of this series is to improve ina226 identification. On systems like Xilinx ZynqMP zcu102 (check dt in the tree) you can find out almost 20 ina226 chips and it is impossible to find out based on simple ina226 which chip is repsonsible for what.
The series is adding two ways how to improve device identification. Please let me know what you think I am happy to do changes in it.

Thanks,
Michal

Michal Simek (4):
iio: adc: ina2xx: Define *device_node only once
iio: adc: ina2xx: Setup better name then simple ina2xx
dt-bindings: Add optional label property for ina2xx
iio: adc: ina2xx: Use label proper for device identification

 .../devicetree/bindings/hwmon/ina2xx.txt          |  2 ++
 drivers/iio/adc/ina2xx-adc.c                      | 15 +++++++++++----
 2 files changed, 13 insertions(+), 4 deletions(-)
Signature · 1 line
2.17.1