Skip to content

arm64: Setting up initrd_hi at run time

Michal Simek u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2arm64: versal: Set initrd_high to as high as possiblearch/arm/Kconfig board/xilinx/versal/board.c include/configs/xilinx_versal.h+22 -10 replies
2/2arm64: zynqmp: Set initrd_high to as high as possiblearch/arm/Kconfig board/xilinx/zynqmp/zynqmp.c include/configs/xilinx_zynqmp.h+8 -30 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/2] arm64: Setting up initrd_hi at run time

Hi,

we are running one u-boot configurations on various boards with different amount of memory that setting up initrd_high is problematic. There shouldn't be a problem to setup initrd_high at run time based on DDR size detection.
The same changes are done for ZynqMP and Versal.

Thanks,
Michal

Siva Durga Prasad Paladugu (1):
arm64: versal: Set initrd_high to as high as possible

T Karthik Reddy (1):
arm64: zynqmp: Set initrd_high to as high as possible

 arch/arm/Kconfig                | 16 ++++++++++++++++
 board/xilinx/versal/board.c     |  6 ++++++
 board/xilinx/zynqmp/zynqmp.c    |  6 ++++++
 include/configs/xilinx_versal.h |  1 -
 include/configs/xilinx_zynqmp.h |  1 -
 5 files changed, 28 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.1