Skip to content

ARM: zynq: Boot variables cleanup

Michal Simek u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5ARM: zynq: Specify MMC controller number for boot sequenceboard/xilinx/zynq/board.c include/configs/zynq-common.h+2 -20 replies
2/5ARM: zynq: Enable USB1 as secondary boot deviceinclude/configs/zynq-common.h+1 -10 replies
3/5ARM: zynq: Fix NOR boot modeinclude/configs/zynq-common.h+2 -20 replies
4/5ARM: zynq: Use {} around variables for qspi and nand boot cmdsinclude/configs/zynq-common.h+2 -20 replies
5/5ARM: zynq: Remove all Xilinx private commandsinclude/configs/zynq-common.h+3 -510 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/5] ARM: zynq: Boot variables cleanup

Hi,

for quite a long time Xilinx was using private boot method. Pretty long time ago we have enabled distribution boot method and provided time to do transition to it. Right now it is good time to remove old methods and move to distro boot fully.
It is also the part of unification between Xilinx Zynq/ZynqMP and Versal SoCs to use the same boot methods.
This series convert Zynq.

Variable modeboot is still setup because Topic boards and Syzygy are using it.

Thanks,
Michal

Michal Simek (5):
ARM: zynq: Specify MMC controller number for boot sequence
ARM: zynq: Enable USB1 as secondary boot device
ARM: zynq: Fix NOR boot mode
ARM: zynq: Use {} around variables for qspi and nand boot cmds
ARM: zynq: Remove all Xilinx private commands

 board/xilinx/zynq/board.c     |  2 +-
 include/configs/zynq-common.h | 66 +++++------------------------------
 2 files changed, 10 insertions(+), 58 deletions(-)
Signature · 1 line
2.17.1