Skip to content

rk3328: clk: Configure CPU clock during initialization

Simon South u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1clk: rockchip: rk3328: Configure CPU clockarch/arm/include/asm/arch-rockchip/cru_rk3328.h drivers/clk/rockchip/clk_rk3328.c+5 -02 replies

Reviews trailers per patch

The patch has a Reviewed-by or Acked-by.

PatchKever Yang
1/1R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/1] rk3328: clk: Configure CPU clock during initialization

This patch changes the RK3328 CRU driver so it explicitly configures the CPU clock during initialization, through a call to rk3328_configure_cpu().

Previously rk3328_configure_cpu() was implemented but not called from anywhere, which I'm assuming was unintentional.

This change matches the RK3399's CRU driver
(drivers/clk/rockchip/clk_rk3399.c) by

- Invoking the function at the start of rkclk_init() and
- Setting the CPU clock to the lowest defined frequency, 600 MHz.

It yields no real functional change (the CPU clock is already set to 600 MHz at power-on) but it does make it straightforward to set a higher clock rate at compile time for systems like the ROCK64 that run reliably at higher frequencies.

Tested on my ROCK64.

Simon South (1):
clk: rockchip: rk3328: Configure CPU clock

 arch/arm/include/asm/arch-rockchip/cru_rk3328.h | 3 +++
 drivers/clk/rockchip/clk_rk3328.c               | 2 ++
 2 files changed, 5 insertions(+)
Signature · 1 line
2.23.0