Skip to content

cmd: fru: Add simple FRU generator and parser

Michal Simek u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3cmd: fru: Add support for FRU commandsMAINTAINERS cmd/Kconfig cmd/Makefile +4 more+392 -06 replies
1/3cmd: fru: Add support for FRU commands+0 -00 replies
1/3cmd: fru: Add support for FRU commands+0 -00 replies
2/3cmd: fru: Add basic fru format generatorcmd/fru.c common/fru_ops.c include/fru.h+128 -10 replies
3/3arm64: versal: Enable FRU commandconfigs/xilinx_versal_virt_defconfig+1 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/3] cmd: fru: Add simple FRU generator and parser

Hi,

this code was develop for i2c eeprom decoding which is the part of VITA IPMI spec. This code is just deconding board information but it can be extended to cover other fields and SoC extensions.

Thanks,
Michal

Michal Simek (2):
cmd: fru: Add basic fru format generator
arm64: versal: Enable FRU command

Siva Durga Prasad Paladugu (1):
cmd: fru: Add support for FRU commands

 MAINTAINERS                          |   3 +
 cmd/Kconfig                          |   8 +
 cmd/Makefile                         |   1 +
 cmd/fru.c                            |  86 +++++++
 common/Makefile                      |   1 +
 common/fru_ops.c                     | 342 +++++++++++++++++++++++++++
 configs/xilinx_versal_virt_defconfig |   1 +
 include/fru.h                        |  78 ++++++
 8 files changed, 520 insertions(+)
 create mode 100644 cmd/fru.c
 create mode 100644 common/fru_ops.c
 create mode 100644 include/fru.h
Signature · 1 line
2.17.1