Skip to content

ARM: clearfog: add run-time board detect

Baruch Siach u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest10 patches 0 repliesNew
  2. v110 patches 0 repliesSuperseded

Changes in v2 from the cover letter

* Fix checkpatch issues in TLV EEPROM code

* Make TLV EEPROM API independent of static storage for compatibility with pre-relocation code

* Rename sys_eeprom to less generic tlv_eeprom throughout the code

* Drop typedefs

* Move board level TLV parse code to the common/ sub-directory for easier reuse in other SolidRun platforms

* Integrate fixes from Joel Johnson: add missing u-boot/crc.h include; select SPL_DRIVERS_MISC_SUPPORT; fix build with CMD_TLV_EEPROM unset

* Add review tags from Stefan Roese

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/10ddr: marvell: a38x: allow board specific clock out setupdrivers/ddr/marvell/a38x/ddr3_training.c drivers/ddr/marvell/a38x/ddr_topology_def.h+11 -20 replies
2/10arm: mvebu: clearfog: enable both DDR clocksboard/solidrun/clearfog/clearfog.c+4 -10 replies
3/10cmd: add tlv_eeprom commandcmd/Kconfig cmd/Makefile cmd/tlv_eeprom.c +1 more+1285 -01 reply
4/10ARM: mvebu: clearfog: add EEPROM devicesarch/arm/dts/armada-388-clearfog-u-boot.dtsi arch/arm/dts/armada-388-clearfog.dts arch/arm/dts/armada-38x-solidrun-microsom.dtsi+26 -00 replies
5/10ARM: mvebu: clearfog: add support for EEPROM TLV infoconfigs/clearfog_defconfig+4 -01 reply
6/10ARM: mvebu: clearfog: read basic TLV databoard/solidrun/clearfog/clearfog.c board/solidrun/common/Makefile board/solidrun/common/tlv_data.c +1 more+153 -01 reply
7/10ARM: mvebu: clearfog: print TLV stored product nameboard/solidrun/clearfog/clearfog.c+10 -10 replies
8/10ARM: mvebu: clearfog: run-time selection of DT filearch/arm/mach-mvebu/Kconfig board/solidrun/clearfog/clearfog.c+15 -00 replies
9/10ARM: mvebu: clearfog: add Clearfog GTR supportboard/solidrun/clearfog/clearfog.c+8 -00 replies
10/10ARM: mvebu: clearfog: add Clearfog Base serdes configurationboard/solidrun/clearfog/clearfog.c+6 -00 replies

Reviews trailers per patch

All 10 patches have a Reviewed-by or Acked-by.

PatchStefan Roese
1/10R-b
2/10R-b
3/10R-b
4/10R-b
5/10R-b
6/10R-b
7/10R-b
8/10R-b
9/10R-b
10/10R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 00/10] ARM: clearfog: add run-time board detect

Newer revisions of SolidRun Clearfog Base/Pro carriers and Armada 388 SOM add EEPROM storage for board detection. This patch series adds support for reading EEPROM stored board information, and using it to set RAM training parameters, serdes configuration, and kernel DT selection.

The information is stored in EEPROM in TLV format defined for the ONIE project.

https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html

This series add the sys_eeprom command from ONIE carried U-Boot patch, with a number for changes as described in the patch log. The TLV format is unchanged.

This series also adds support for the newly introduced single board, Aramda 385 based Clearfog GTR system. RAM configuration on that system requires both Armada 38x DDR clocks to be enabled. The first patch in this series adds the necessary code to allow per-board selection of DDR clock.

Changes in v2:

* Fix checkpatch issues in TLV EEPROM code

* Make TLV EEPROM API independent of static storage for compatibility with pre-relocation code

* Rename sys_eeprom to less generic tlv_eeprom throughout the code

* Drop typedefs

* Move board level TLV parse code to the common/ sub-directory for easier reuse in other SolidRun platforms

* Integrate fixes from Joel Johnson: add missing u-boot/crc.h include; select SPL_DRIVERS_MISC_SUPPORT; fix build with CMD_TLV_EEPROM unset

* Add review tags from Stefan Roese

Baruch Siach (10):
ddr: marvell: a38x: allow board specific clock out setup
arm: mvebu: clearfog: enable both DDR clocks
cmd: add tlv_eeprom command
ARM: mvebu: clearfog: add EEPROM devices
ARM: mvebu: clearfog: add support for EEPROM TLV info
ARM: mvebu: clearfog: read basic TLV data
ARM: mvebu: clearfog: print TLV stored product name
ARM: mvebu: clearfog: run-time selection of DT file
ARM: mvebu: clearfog: add Clearfog GTR support
ARM: mvebu: clearfog: add Clearfog Base serdes configuration

 arch/arm/dts/armada-388-clearfog-u-boot.dtsi  |   12 +
 arch/arm/dts/armada-388-clearfog.dts          |    6 +
 .../arm/dts/armada-38x-solidrun-microsom.dtsi |    8 +
 arch/arm/mach-mvebu/Kconfig                   |    1 +
 board/solidrun/clearfog/clearfog.c            |   72 +-
 board/solidrun/common/Makefile                |    5 +
 board/solidrun/common/tlv_data.c              |  102 ++
 board/solidrun/common/tlv_data.h              |   18 +
 cmd/Kconfig                                   |   14 +
 cmd/Makefile                                  |    2 +
 cmd/tlv_eeprom.c                              | 1105 +++++++++++++++++
 configs/clearfog_defconfig                    |    4 +
 drivers/ddr/marvell/a38x/ddr3_training.c      |   10 +-
 drivers/ddr/marvell/a38x/ddr_topology_def.h   |    3 +
 include/tlv_eeprom.h                          |  164 +++
 15 files changed, 1522 insertions(+), 4 deletions(-)
 create mode 100644 board/solidrun/common/Makefile
 create mode 100644 board/solidrun/common/tlv_data.c
 create mode 100644 board/solidrun/common/tlv_data.h
 create mode 100644 cmd/tlv_eeprom.c
 create mode 100644 include/tlv_eeprom.h
Signature · 1 line
2.24.1