Skip to content

gpio: add driver for Mellanox BlueField 2 GPIO controller

Asmaa Mnebhi lkml 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest1 patch 2 repliesIn review
  2. v31 patch 2 repliesSuperseded
  3. v21 patch 2 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v11 patch1 replySuperseded

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1gpio: add driver for Mellanox BlueField 2 GPIO controllerdrivers/gpio/Kconfig drivers/gpio/Makefile drivers/gpio/gpio-mlxbf2.c+343 -02 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [PATCH v4 0/1] gpio: add driver for Mellanox BlueField 2 GPIO controller

This patch adds support for the GPIO controller used by Mellanox BlueFIeld 2 SOCs.
This patch addresses the following issues:
1) Make mlxbf2_gpio_lock_acquire and mlxbf2_gpio_lock_release symmetrical
2) renamed mlxbf2_gpio_state to mlxbf2_gpio_context
3) removed unnecessary informational message.

Asmaa Mnebhi (1):
gpio: add driver for Mellanox BlueField 2 GPIO controller

 drivers/gpio/Kconfig       |   7 +
 drivers/gpio/Makefile      |   1 +
 drivers/gpio/gpio-mlxbf2.c | 335 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 343 insertions(+)
 create mode 100644 drivers/gpio/gpio-mlxbf2.c
Signature · 1 line
2.1.2