Skip to content

Add IMR driver for Keem Bay

Daniele Alessandrelli linux-arm-kernel lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 17 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1soc: keembay: Add Keem Bay IMR driverMAINTAINERS drivers/soc/Kconfig drivers/soc/Makefile +3 more+74 -013 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/1] Add IMR driver for Keem Bay

The following is a patch for a new Intel Movidius SoC, code-named Keem Bay.

Keem Bay needs a driver to disable the Isolated Memory Region (IMR) set up by the SoC bootloader during early boot.

If such an IMR is not disabled and some device tries to access it, the system will reboot.

Since this driver is SoC-specific and Keem Bay is a new SoC, I was unsure of where to put this driver. In the end I decided to create a new 'keembay' directory in 'drivers/soc'. I hope that's reasonable, if not, just let me know.

Daniele Alessandrelli (1):
soc: keembay: Add Keem Bay IMR driver

 MAINTAINERS                       |  5 ++++
 drivers/soc/Kconfig               |  1 +
 drivers/soc/Makefile              |  1 +
 drivers/soc/keembay/Kconfig       | 22 +++++++++++++++++
 drivers/soc/keembay/Makefile      |  5 ++++
 drivers/soc/keembay/keembay-imr.c | 40 +++++++++++++++++++++++++++++++
 6 files changed, 74 insertions(+)
 create mode 100644 drivers/soc/keembay/Kconfig
 create mode 100644 drivers/soc/keembay/Makefile
 create mode 100644 drivers/soc/keembay/keembay-imr.c
Signature · 1 line
2.21.1