Skip to content

fpga: zynqpl: Add support for AES engine

Michal Simek u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5fpga: zynqpl: Correct PL bitstream loading sequence for zynqaesboard/xilinx/zynq/cmds.c drivers/fpga/zynqpl.c include/zynqpl.h+11 -60 replies
2/5fpga: zynqpl: Check fpga config completiondrivers/fpga/zynqpl.c+17 -20 replies
3/5fpga: zynqpl: Check if aes engine is enableddrivers/fpga/zynqpl.c+8 -00 replies
4/5fpga: zynqpl: Flush dcache only for non-bitstream datadrivers/fpga/zynqpl.c+3 -20 replies
5/5fpga: zynqpl: Add zynq aes load & loadp commandsboard/xilinx/zynq/cmds.c+35 -120 replies

Reviews trailers per patch

1 of 5 patches has a Reviewed-by or Acked-by.

PatchSiva Durga Prasad Paladugu
1/5
2/5
3/5A-b
4/5
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/5] fpga: zynqpl: Add support for AES engine

Hi,

this patchset is adding support for AES support.

Thanks,
Michal

Ibai Erkiaga (1):
fpga: zynqpl: Check if aes engine is enabled

Siva Durga Prasad Paladugu (1):
fpga: zynqpl: Correct PL bitstream loading sequence for zynqaes

T Karthik Reddy (3):
fpga: zynqpl: Check fpga config completion
fpga: zynqpl: Flush dcache only for non-bitstream data
fpga: zynqpl: Add zynq aes load & loadp commands

 board/xilinx/zynq/cmds.c | 54 +++++++++++++++++++++++++++++-----------
 drivers/fpga/zynqpl.c    | 39 +++++++++++++++++++++++------
 include/zynqpl.h         |  3 ++-
 3 files changed, 74 insertions(+), 22 deletions(-)
Signature · 1 line
2.26.2