Skip to content

net: stmmac: Fix multicast filter on IPQ806x

Jonathan McDowell linux-arm-kernel linux-arm-msm lkml netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2net: stmmac: dwmac1000: provide multicast filter fallbackdrivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c+3 -00 replies
2/2net: ethernet: stmmac: Disable hardware multicast filterdrivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c+1 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH net 0/2] net: stmmac: Fix multicast filter on IPQ806x

This pair of patches are the result of discovering a failure to correctly receive IPv6 multicast packets on such a device (in particular DHCPv6 requests and RA solicitations). Putting the device into promiscuous mode, or allmulti, both resulted in such packets correctly being received. Examination of the vendor driver (nss-gmac from the qsdk) shows that it does not enable the multicast filter and instead falls back to allmulti.

Extend the base dwmac1000 driver to fall back when there's no suitable hardware filter, and update the ipq806x platform to request this.

Jonathan McDowell (2):
net: stmmac: dwmac1000: provide multicast filter fallback
net: ethernet: stmmac: Disable hardware multicast filter

 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c  | 1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 3 +++
 2 files changed, 4 insertions(+)
Signature · 1 line
2.20.1