Skip to content

hwmon: add Corsair PSU HID controller driver

Wilken Gottwalt linux-hwmon lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1hwmon: add Corsair PSU HID controller driverDocumentation/hwmon/corsair-psu.rst Documentation/hwmon/index.rst MAINTAINERS +3 more+763 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/1] hwmon: add Corsair PSU HID controller driver

The Corsair digital power supplies of the series RMi, HXi and AXi include a small micro-controller with a lot of sensors attached. It can accessed by an USB connector from the outside.

This micro-controller provides its data by a simple proprietary USB HID protocol. The data provided are temperatures, current and voltage levels, power used, uptimes, fan speed and a lot more. It is also possible to configure the PSU (fan mode, mono/multi-rail, over current protection).

This driver provides access to the sensors/statistics of the RMi and HXi series power supplies. It does not support configuring these devices, because there would be many ways to misconfigure or even damage the PSU.

This patch adds:
- hwmon driver corsair-psu
- hwmon documentation
- updates MAINTAINERS

Wilken Gottwalt (1):
hwmon: add Corsair PSU HID controller driver

 Documentation/hwmon/corsair-psu.rst |  78 ++++
 Documentation/hwmon/index.rst       |   1 +
 MAINTAINERS                         |   7 +
 drivers/hwmon/Kconfig               |  12 +
 drivers/hwmon/Makefile              |   1 +
 drivers/hwmon/corsair-psu.c         | 664 ++++++++++++++++++++++++++++
 6 files changed, 763 insertions(+)
 create mode 100644 Documentation/hwmon/corsair-psu.rst
 create mode 100644 drivers/hwmon/corsair-psu.c
Signature · 1 line
2.29.0