Skip to content

ARM: dts: qcom: Enable various devices for IPQ806x / RB3011

Jonathan McDowell linux-arm-msm linux-devicetree lkml 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest5 patches 1 replyIn review
  2. v15 patches 4 repliesSuperseded

Changes in v2 from the cover letter

Fix ADM label to "dma-controller"
Drop spurious "syscon" on GCC for tsens changes

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806xarch/arm/boot/dts/qcom-ipq8064.dtsi+67 -00 replies
2/5ARM: dts: qcom: Add tsens details to ipq806xarch/arm/boot/dts/qcom-ipq8064.dtsi+241 -00 replies
3/5ARM: dts: qcom: Add USB port definitions to ipq806xarch/arm/boot/dts/qcom-ipq8064.dtsi+88 -01 reply
4/5ARM: dts: qcom: add L2CC and RPM for IPQ8064arch/arm/boot/dts/qcom-ipq8064.dtsi+29 -00 replies
5/5ARM: dts: qcom: Enable NAND + USB for RB3011arch/arm/boot/dts/qcom-ipq8064-rb3011.dts+58 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/5] ARM: dts: qcom: Enable various devices for IPQ806x / RB3011

This series adds various devices (NAND, USB, tsens, L2CC, RPM) which have either recently gained mainline drivers, or just failed to be previously added, to the DTS for the IPQ806x platform. It then enables them for the MikroTik RB3011 platform, where they have all been tested.

I've done the additions to the main IPQ806x DTS as separate commits for each logical set, and then a single wholesale set of changes for the RB3011 to turn everything on. Happy to squash to 1/2 commits or split out further if desired.

v2:
Fix ADM label to "dma-controller"
Drop spurious "syscon" on GCC for tsens changes

Jonathan McDowell (5):
ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x
ARM: dts: qcom: Add tsens details to ipq806x
ARM: dts: qcom: Add USB port definitions to ipq806x
ARM: dts: qcom: add L2CC and RPM for IPQ8064
ARM: dts: qcom: Enable NAND + USB for RB3011

 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts |  58 +++
 arch/arm/boot/dts/qcom-ipq8064.dtsi       | 425 ++++++++++++++++++++++
 2 files changed, 483 insertions(+)
Signature · 1 line
2.20.1