Skip to content

zynqmp: Add support for secure OS loading

Michal Simek u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3zynqmp: Do not place u-boot to reserved memory locationboard/xilinx/zynqmp/zynqmp.c+21 -00 replies
2/3zynqmp: Generate u-boot.its also with TEE dynamicallyarch/arm/mach-zynqmp/mkimage_fit_atf.sh+40 -10 replies
3/3zynqmp: Pass bl32 entry to TF-A via xilinx handoff structurearch/arm/mach-zynqmp/handoff.c+14 -50 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] zynqmp: Add support for secure OS loading

Hi,

this series is adding support for working with TEE in much easier and flexible way.

TF-A can be placed to any location. When it is placed to DDR you should enable DT support which reserve location where TF-A is
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/10131

The similar DT support can be added to secure OS but I haven't sent that patches out in OPTEE case yet.

Thanks,
Michal

Michal Simek (3):
zynqmp: Do not place u-boot to reserved memory location
zynqmp: Generate u-boot.its also with TEE dynamically
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure

 arch/arm/mach-zynqmp/handoff.c          | 19 +++++++++---
 arch/arm/mach-zynqmp/mkimage_fit_atf.sh | 41 ++++++++++++++++++++++++-
 board/xilinx/zynqmp/zynqmp.c            | 21 +++++++++++++
 3 files changed, 75 insertions(+), 6 deletions(-)
Signature · 1 line
2.31.1