Skip to content

arm64: zynqmp: Use sysreset framework for reset and poweroff

Michal Simek u-boot 1 version Applied

Status from this message: Applied.

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 1 replyApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/3psci: Do not define do_poweroff() if CONFIG_SYSRESET_CMD_POWEROFF is enableddrivers/firmware/psci.c+1 -10 replies
2/3arm64: zynqmp: Do not define do_reset() if sysreset is enabledboard/xilinx/zynqmp/zynqmp.c+2 -00 replies
3/3arm64: zynqmp: Enable reset and poweroff via sysreset frameworkconfigs/xilinx_zynqmp_virt_defconfig+3 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] arm64: zynqmp: Use sysreset framework for reset and poweroff

Hi,

it is time to do reset/poweroff via sysreset framework to align it with psci 1.1 spec.

Thanks,
Michal

Michal Simek (3):
psci: Do not define do_poweroff() if CONFIG_SYSRESET_CMD_POWEROFF is
enabled
arm64: zynqmp: Do not define do_reset() if sysreset is enabled
arm64: zynqmp: Enable reset and poweroff via sysreset framework

 board/xilinx/zynqmp/zynqmp.c         | 2 ++
 configs/xilinx_zynqmp_virt_defconfig | 3 +++
 drivers/firmware/psci.c              | 2 +-
 3 files changed, 6 insertions(+), 1 deletion(-)
Signature · 1 line
2.32.0