Skip to content

xilinx: Add RTC support for Xilinx ZynqMP

Michal Simek u-boot 1 version Applied

Status from this message: Applied.

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 1 replyApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/4dm: rtc: uclass: Add flag to control sequence numberingdrivers/rtc/rtc-uclass.c+1 -00 replies
2/4cmd: date: rtc: Update command to read the first RTC with seq 0cmd/date.c+6 -30 replies
3/4rtc: zynqmp: Add support for ZynqMP RTCMAINTAINERS drivers/rtc/Kconfig drivers/rtc/Makefile +1 more+167 -00 replies
4/4xilinx: zynqmp: Enable CMD_RTC command with Zynqmp RTC driverconfigs/xilinx_zynqmp_virt_defconfig+2 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] xilinx: Add RTC support for Xilinx ZynqMP

Hi,

this series is correcting RTC uclass behavior to match RTC aliases to enable RTC_EMULATION driver with ZYNQMP driver. If DT node is present ZynqMP RTC is used. If not RTC emaulation is used.

The driver has been tested on Xilinx zcu104 also with booting to Linux to make sure that U-Boot format match with Linux format.

Thanks,
Michal

Michal Simek (4):
dm: rtc: uclass: Add flag to control sequence numbering
cmd: date: rtc: Update command to read the first RTC with seq 0
rtc: zynqmp: Add support for ZynqMP RTC
xilinx: zynqmp: Enable CMD_RTC command with Zynqmp RTC driver

 MAINTAINERS                          |   1 +
 cmd/date.c                           |   9 +-
 configs/xilinx_zynqmp_virt_defconfig |   2 +
 drivers/rtc/Kconfig                  |   7 ++
 drivers/rtc/Makefile                 |   1 +
 drivers/rtc/rtc-uclass.c             |   1 +
 drivers/rtc/zynqmp_rtc.c             | 158 +++++++++++++++++++++++++++
 7 files changed, 176 insertions(+), 3 deletions(-)
 create mode 100644 drivers/rtc/zynqmp_rtc.c
Signature · 1 line
2.32.0