net: stmmac: Add ethtool per-queue statistic
Status from this message: This series was applied to netdev/net-next.git (refs/heads/master):
Get series with b4
b4 am [email protected]Versions newest first
Patches in v1 All 3 applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | net: stmmac: fix INTR TBU status affecting irq count statisticdrivers/ | +3 | 1 reply | Applied |
| 2/3 | net: stmmac: add ethtool per-queue statistic frameworkdrivers/ drivers/ drivers/ | +80 | 1 reply | Applied |
| 3/3 | net: stmmac: add ethtool per-queue irq statistic supportdrivers/ drivers/ drivers/ | +6 | 1 reply | Applied |
Reviews trailers per patch
All 3 patches have a Reviewed-by or Acked-by.
| Patch | Wong Vee Khee |
|---|---|
| 1/3 | A-b |
| 2/3 | A-b |
| 3/3 | A-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH net-next v1 0/3] net: stmmac: Add ethtool per-queue statistic
Adding generic ethtool per-queue statistic framework to display the statistics for each rx/tx queue. In future, users can avail it to add more per-queue specific counters. Number of rx/tx queues displayed is depending on the available rx/tx queues in that particular MAC config and this number is limited up to the MTL_MAX_{RX|TX}_QUEUES defined in the driver.
Ethtool per-queue statistic display will look like below, when users start adding more counters.
Example - 1:
q0_tx_statA:
q0_tx_statB:
q0_tx_statC:
|
q0_tx_statX:
.
.
.
qMAX_tx_statA:
qMAX_tx_statB:
qMAX_tx_statC:
|
qMAX_tx_statX:
q0_rx_statA:
q0_rx_statB:
q0_rx_statC:
|
q0_rx_statX:
.
.
.
qMAX_rx_statA:
qMAX_rx_statB:
qMAX_rx_statC:
|
qMAX_rx_statX:
Example - 2: Ping test using the tx queue 3.
$ tc qdisc add dev enp0s30f4 root mqprio num_tc 2 map 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 3@0 1@3 hw 0
Statistic before ping:
---------------------
$ ethtool -S enp0s30f4
[ snip ]
q3_tx_pkt_n: 7916
q3_tx_irq_n: 316[ snip ]
$ cat /proc/interrupts
[ snip ]
143: 0 0 0 316 0 0
0 0 IR-PCI-MSI 499719-edge enp0s30f4:tx-3
[ snip ]
$ ping -I enp0s30f4 192.168.1.10 -i 0.01 -c 100 > /dev/null
Statistic after ping:
---------------------
$ ethtool -S enp0s30f4
[ snip ]
q3_tx_pkt_n: 8016
q3_tx_irq_n: 320[ snip ]
$ cat /proc/interrupts
[ snip ]
143: 0 0 0 320 0 0
0 0 IR-PCI-MSI 499719-edge enp0s30f4:tx-3
[ snip ]
Vijayakannan Ayyathurai (2):
net: stmmac: add ethtool per-queue statistic framework
net: stmmac: add ethtool per-queue irq statistic support
Voon Weifeng (1):
net: stmmac: fix INTR TBU status affecting irq count statistic
drivers/net/ethernet/stmicro/stmmac/common.h | 13 ++++ .../net/ethernet/stmicro/stmmac/dwmac4_lib.c | 7 +- .../ethernet/stmicro/stmmac/stmmac_ethtool.c | 67 ++++++++++++++++++- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 5 ++ 4 files changed, 89 insertions(+), 3 deletions(-)
base-commit: e4637f621203cb482f3ddb590cfe9f65045d92a6
Signature · 1 line
2.17.1