Skip to content

IOT2050-related enhancements

Jan Kiszka u-boot 7 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v7 Latest15 patches 19 repliesIn review
  2. v613 patches 1 replySuperseded
  3. v512 patches 26 repliesSuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v414 patches3 repliesSuperseded
v313 patches1 replySuperseded
v213 patches12 repliesSuperseded
v112 patches5 repliesSuperseded

Changes in v7 from the cover letter

- rebased over master
- included M.2 support patches, now that the DT is merged into the kernel

Patches in v7 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/15board: siemens: iot2050: Split the build for PG1 and PG2arch/arm/dts/k3-am65-iot2050-boot-image.dtsi board/siemens/iot2050/Kconfig board/siemens/iot2050/board.c +3 more+70 -777 replies
2/15arm: dts: iot2050: Use the auto generator nodes for fdtarch/arm/dts/k3-am65-iot2050-boot-image.dtsi board/siemens/iot2050/board.c configs/iot2050_pg1_defconfig +1 more+12 -371 reply
3/15iot2050: Update firmware layoutarch/arm/dts/k3-am65-iot2050-boot-image.dtsi configs/iot2050_pg1_defconfig configs/iot2050_pg2_defconfig +2 more+11 -350 replies
4/15iot2050: Migrate settings into board env fileboard/siemens/iot2050/iot2050.env include/configs/iot2050.h+11 -93 replies
5/15iot2050: Add watchdog start to bootcmdboard/siemens/iot2050/iot2050.env configs/iot2050_pg1_defconfig configs/iot2050_pg2_defconfig+12 -00 replies
6/15iot2050: Add CFG_ENV_FLAGS_LIST_STATICinclude/configs/iot2050.h+7 -00 replies
7/15arm: dts: iot2050: Allow verifying U-Boot proper by SPLarch/arm/dts/k3-am65-iot2050-boot-image.dtsi+16 -01 reply
8/15tools: Add script for converting public key into device tree includetools/key2dtsi.py+64 -01 reply
9/15iot2050: Add script for signing artifactsdoc/board/siemens/iot2050.rst tools/iot2050-sign-fw.sh+103 -01 reply
10/15arm: dts: iot2050: Optionally embed OTP programming data into imagearch/arm/dts/k3-am65-iot2050-boot-image.dtsi board/siemens/iot2050/Kconfig doc/board/siemens/iot2050.rst +1 more+32 -00 replies
11/15doc: iot2050: Add a note about the watchdog firmwaredoc/board/siemens/iot2050.rst+4 -00 replies
12/15board: siemens: iot2050: use the named gpio to control the user-buttonboard/siemens/iot2050/board.c+1 -11 reply
13/15iot2050: Refresh defconfigs and activate CONFIG_EFI_SCROLL_ON_CLEAR_SCREENconfigs/iot2050_pg1_defconfig configs/iot2050_pg2_defconfig+2 -42 replies
14/15arm: dts: iot2050: Add support for M.2 variantarch/arm/dts/Makefile arch/arm/dts/k3-am6548-iot2050-advanced-m2.dts configs/iot2050_pg2_defconfig +1 more+128 -40 replies
15/15iot2050: Add support for configuring M.2 connectorarch/arm/dts/Makefile arch/arm/dts/k3-am65-iot2050-boot-image.dtsi arch/arm/dts/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie-overlay.dts +4 more+391 -32 replies

Reviews trailers per patch

4 of 15 patches have a Reviewed-by or Acked-by.

PatchSimon Glass
1/15
2/15R-b
3/15
4/15
5/15
6/15
7/15R-b
8/15
9/15
10/15
11/15
12/15R-b
13/15R-b
14/15
15/15

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v7 thread

Cover letter [PATCH V7 00/15] IOT2050-related enhancements

Flushing our upstream queue for the IOT2050 device, this mostly brings board-specific changes such as:

- updated build process and firmware layout for PG1 vs. PG2 devices
- more watchdog preparations
- preparations for verified boot on IOT2050 Advanced devices
- support for M.2 variant

Changes in v7:
- rebased over master
- included M.2 support patches, now that the DT is merged into the kernel

Changes in v6:
- fixed CFG_ENV_FLAGS_LIST_STATIC setup
- migrated to board env file
- cleaned up #ifdef in "Optionally embed OTP programming data into image"
- rebased over latest master

Changes in v5:
- factored out two patches

Changes in v4:
- rebased over latest master
- make use of new CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN

Changes in v3:
- further reworked patch 1 to load default env directly, leaving driver ordering alone

Changes in v2:
- rebased over latest master
- reworked patch 1 to be less invasive to the code
- added "iot2050: use the named gpio to control the user-button"

Jan

CC chao zeng <[email protected]>
CC Su Baocheng <[email protected]>

Jan Kiszka (11):
iot2050: Update firmware layout
iot2050: Migrate settings into board env file
iot2050: Add watchdog start to bootcmd
iot2050: Add CFG_ENV_FLAGS_LIST_STATIC
arm: dts: iot2050: Allow verifying U-Boot proper by SPL
tools: Add script for converting public key into device tree include
iot2050: Add script for signing artifacts
arm: dts: iot2050: Optionally embed OTP programming data into image
doc: iot2050: Add a note about the watchdog firmware
iot2050: Refresh defconfigs and activate
CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN
iot2050: Add support for configuring M.2 connector

Su Baocheng (2):
board: siemens: iot2050: Split the build for PG1 and PG2
arm: dts: iot2050: Use the auto generator nodes for fdt

chao zeng (2):
board: siemens: iot2050: use the named gpio to control the user-button
arm: dts: iot2050: Add support for M.2 variant

 arch/arm/dts/Makefile                         |   5 +-
 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi  | 149 +++++-----
 ...050-advanced-m2-bkey-ekey-pcie-overlay.dts |  27 ++
 ...-iot2050-advanced-m2-bkey-usb3-overlay.dts |  47 +++
 .../arm/dts/k3-am6548-iot2050-advanced-m2.dts | 121 ++++++++
 board/siemens/iot2050/Kconfig                 |  35 ++-
 board/siemens/iot2050/board.c                 | 270 +++++++++++++++++-
 board/siemens/iot2050/iot2050.env             |  17 ++
 ...ot2050_defconfig => iot2050_pg1_defconfig} |   8 +-
 ...ot2050_defconfig => iot2050_pg2_defconfig} |  12 +-
 doc/board/siemens/iot2050.rst                 | 101 ++++++-
 include/configs/iot2050.h                     |  19 +-
 tools/binman/missing-blob-help                |  16 +-
 tools/iot2050-sign-fw.sh                      |  51 ++++
 tools/key2dtsi.py                             |  64 +++++
 15 files changed, 818 insertions(+), 124 deletions(-)
 create mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie-overlay.dts
 create mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced-m2-bkey-usb3-overlay.dts
 create mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced-m2.dts
 create mode 100644 board/siemens/iot2050/iot2050.env
 copy configs/{iot2050_defconfig => iot2050_pg1_defconfig} (93%)
 rename configs/{iot2050_defconfig => iot2050_pg2_defconfig} (90%)
 create mode 100755 tools/iot2050-sign-fw.sh
 create mode 100755 tools/key2dtsi.py
Signature · 1 line
2.35.3